Table of Contents
Related Manuals for Guardian Fall Protection 10705
Summary of Contents for Guardian Fall Protection 10705
-
Page 1: Table Of Contents
Product Name: Concrete Anchor Strap Part #: 10705; 10710; 10715 ; 10717; 10720 Instruction Manual Do not throw away these instructions! Read and understand these instructions before using equipment! Introduction Applicable Safety Standards Worker Classifications Product Specific Applications Limitations Components and Specifications... -
Page 2: Introduction
Introduction Thank you for purchasing a Guardian Fall User Information Protection Concrete Anchor Strap. This manual must be read and understood in its entirety, and used as part of an employee training program as required by Date of First Use: OSHA or any applicable state agency. -
Page 3: Limitations
Restraint: Concrete Anchor Strap may be used in Restraint applications. Restraint systems prevent workers from reaching the leading edge of a fall hazard. Always account for fully deployed length of lanyard/SRL. Structure must withstand loads applied in the directions permitted by the system of at least 1,000 lbs. -
Page 4: Components And Specifications
53° working angle. Components and Specifications Materials: polyester, nylon, and galvanized steel. Part # Length Description 10705 3’ Concrete Anchor Strap w/Loop & D-ring Ends 10710 3’ Concrete Anchor Strap w/Loop & D-ring Ends & Protective Sheathing 10715 4’... -
Page 5: Installation And Use
Installation and Use Prior to installation, plan your system: 1. Ensure all PFAS equipment is selected and deemed compatible with Concrete Anchor Strap by a Competent Person. 2. Select installation location for Concrete Anchor Strap. Selected installation location MUST be structural rebar deemed compatible by a Competent Person, and must be capable of withstanding minimum application loads as specified by this instruction manual. -
Page 6: Maintenance, Cleaning, And Storage
Maintenance, Cleaning, and Storage If Concrete Anchor Strap fails inspection in any way, immediately remove it from service, and contact Guardian to inquire about its return or repair. Cleaning after use is important for maintaining the safety and longevity of Concrete Anchor Strap. Remove all dirt, corrosives, and contaminants from Concrete Anchor Strap before and after each use. -
Page 7: Safety Information
Safety Information Failure to understand and comply with safety regulations may result in serious injury or death. Regulations included herein are not all-inclusive, WARNING are for reference only, and are not intended to replace a Competent Person’s judgment or knowledge of federal or state standards. Do not alter equipment. -
Page 8: Labels
Labels INSPECTION GRID Concrete User must inspect prior to Anchor Strap EACH use. Competent Person must complete formal Part #: inspection every 6 months. Competent Person to inspect and initial. Prior to use, read and understand all instructions provided Date of First Use: by manufacturer at time of shipment.
Need help?
Do you have a question about the 10705 and is the answer not in the manual?
Questions and answers