Snmp - Intercoax ECP-2808RM User Manual

4.6. SNMP

Using the SNMP protocol, the system or network administrator can monitor the device, using the Read-Only and
Read-Write Community Strings.
It is possible to simply test our SNMP functionality in ECP Manager, in the 'SNMP' page:
Here, all SNMP values, both Read-Only and Read-Write can be found:
To test a specific SNMP value, select a Group and ECP you have set up previously in ECP Manager,
and click on the value you would like to test. The Community String will be filled out automatically :
Click on 'Get', and if you are connected to the RM unit, it will display the SNMP value :
Management Software Configuration — 30