Precaution And Safety Guidelines - Intercoax ECP-2808RM User Manual

Precaution and Safety Guidelines

• Please install the device following the installation guide.
• Read all warnings.
• Warning: Do not touch the device and cable with wet hands.
• Warning: Clean this device only with a dry cloth.
• Warning: Please do not put the device on anything electrically conductive (screwdrivers, coins, iron, etc.)
and do not put them around water.
• Warning: Do not install near any heat sources such as radiators, stoves
or other devices that produce heat.
• Warning: Do not use for other purposes.
Warning: Do not put the signal lines (Coax, UTP) in the same conduit as high voltage wiring
•
• Do not apply any sticker or paint onto the device.
• Indoor use only.
• Please use only attachments or accessories specified by the manufacturer.
• Unplug the device during a lightning storm or when the device is not used for a long time.
• Do not connect analog cameras to the BNC connectors (B-Linx Port) on this device (ECP Series only).
• Do not connect any IP devices to the RJ45 connectors (T-Linx Port) on this device (EUP Series only).
• When the unit is not working properly, please contact your supplier or customer service.
• Please do not disassemble the unit by yourself.
• If this device emits smoke, abnormal noise, or a strange odor, please turn off
the power switch, unplug the AC power cord immediately, and contact your supplier or customer service.
The lightning flash with arrowhead symbol within an equilateral triangle, is intended
to alert the user to the presence of uninsulated "dangerous voltage" within
the product's enclosure that may be of sufficient magnitude to constitute a risk
of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (servicing) instructions
in the literature accompanying the product.
4