Setting Up Ecp Manager; Setting Up Groups And Ecp Units - Intercoax ECP-2808RM User Manual

4.4. Setting up ECP Manager

4.4.1. Setting up Groups and ECP units

Start ECP Manager, if it is not running already.
It will show the login screen. Use the credentials 'admin' and password 'admin' to log in:
In the left navigation panel, select 'ECP Config':
In the 'Group Configuration' tab, you can set up groups of RM units to monitor.
These can be individually enabled or disabled to monitor different groups of RM units in separate buildings/
networks.
Make a new Group by giving it a name and giving up the location, followed by clicking the 'Add' button:
You will see the newly created Group in the list below:
Management Software Configuration — 18