Management Software Configuration; Overview; System Requirements - Intercoax ECP-2808RM User Manual

4. Management Software Configuration

4.1. Overview

ECP MANAGER LITE & ECP MANAGER
█
• The ECP MANAGER LITE is the browser based GUI. Users can access to management of all
ECP/EUP-2808/16 series and its connected IEEE1901-HPAV standard transmitters.
• The ECP MANAGER software allows managing multiple INTERCOAX Managed Receivers remotely from the
central management office. With the ECP MANAGER software, users can access to all connected
IEEE1901-HPAV standard transmitters.
• Various additional features are available with the ECP Manager and ECP Manager Lite as below:
- Remote monitoring for ECP/EUP devices & End or remote (usually Tx models) device connection
- Remote transceiver Joining (Network Grouping)
- IP addressing for managed EoC Switch
- System reboot
- Power reset by each port
- Real time Monitoring for power consumption by each port
- Real time Monitoring for total power consumption
- Port locking for extra secured network connectivity
- Multicast setting with IGMP Query Generation
- Scheduled event reporting and alert reporting to designative users
- SNMP Setting
- VLAN Setting
- QoS Setting
- Configuration backup & Restore

4.2. System Requirements

• Recommended Operating System for ECP Manager : Windows 7 or Higher version
• Internet connectivity : During initial installation for ECP manager, an internet connection is required.
Management Software Configuration — 14