Texas Instruments ADC32RF-EVM Series User Manual
  1. Manuals
  2. Brands
  3. Texas Instruments Manuals
  4. Motherboard
  5. ADC32RF-EVM Series
  6. User manual

Texas Instruments ADC32RF-EVM Series User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
The ADC32RFxx-EVM is the circuit board for evaluating the ADC32RFxx family of analog-to-digital
converters. This document is intended to guide the ADC32RFxx-EVM user through the process of setting
up the EVM successfully. The configuration of the ADC32RF45, ADC32RF44, ADC32RF42, ADC32RF82
and ADC32RF80 in Digital Down-Convert (DDC) and Bypass-DDC modes with different clocking schemes
are covered in this document. The steps for ADC32RF8x also apply to ADC31RF80 (Channel A).
ADC31RF80 is a single channel variant.
......................................................................................................................
1
1.1
1.2
1.3
1.4
2
2.1
2.2
2.3
3
3.1
3.2
3.3
4
4.1
4.2
4.3
5
5.1
5.2
5.3
6
6.1
6.2
6.3
7
7.1
7.2
7.3
8
8.1
8.2
1
2
3
4
SLAU620D - April 2016 - Revised August 2017
Submit Documentation Feedback
.................................................................................................
..................................................................................................
..........................................................................................................
............................................................................................................
..........................................................................................................
................................................................................................
.......................................................................................
...........................................................................................................
...................................................................................................
.........................................................................................................
.................................................................................................
.........................................................................................................
.................................................................................................
.........................................................................................................
.................................................................................................
.........................................................................................................
.................................................................................................
............................................................................
List of Figures
.....................................................................................................
Copyright © 2016-2017, Texas Instruments Incorporated
SLAU620D - April 2016 - Revised August 2017
ADC32RFxx-EVM
Contents
.............................................................
...............................................
.................................................................
.................................................................
.................................................................
.................................................................
.................................................................
........................................................
........................................................................
...................................................................
.........................................................
...................................................................
User's Guide
2
3
3
3
5
6
6
7
8
9
9
9
11
..........................
13
13
13
18
.....
21
21
21
26
.....................
29
29
29
31
.................
32
32
32
34
36
36
37
4
8
9
10
1
ADC32RFxx-EVM

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ADC32RF-EVM Series and is the answer not in the manual?

Questions and answers

Related Manuals for Texas Instruments ADC32RF-EVM Series

Summary of Contents for Texas Instruments ADC32RF-EVM Series

  • Page 1: Table Of Contents

    ..............ADC32RFxx-EVM GUI Bench Setup Block Diagram ............ADC32RFxx-EVM GUI LMK04828 PLL1 Page Bypass Mode ..............ADC32RFxx-EVM Quick Setup View Bypass Mode SLAU620D – April 2016 – Revised August 2017 ADC32RFxx-EVM Submit Documentation Feedback Copyright © 2016–2017, Texas Instruments Incorporated...

  • Page 2: Overview

    LMX2582 (or LMX2592) clock synthesizer to generate a very low-noise clock source for clocking the ADC32RFxx ADC. • High-speed serial data output over a standard FPGA Mezzanine Card (FMC) interface connector. ADC32RFxx-EVM SLAU620D – April 2016 – Revised August 2017 Submit Documentation Feedback Copyright © 2016–2017, Texas Instruments Incorporated...

  • Page 3: Required Hardware

    High Speed Data Converter Pro software, version 4.2 or higher Evaluation Board Feature Identification Summary The EVM features are labeled in Figure SLAU620D – April 2016 – Revised August 2017 ADC32RFxx-EVM Submit Documentation Feedback Copyright © 2016–2017, Texas Instruments Incorporated...

  • Page 4: Evm Feature Locations

    Overview www.ti.com Figure 1. EVM Feature Locations ADC32RFxx-EVM SLAU620D – April 2016 – Revised August 2017 Submit Documentation Feedback Copyright © 2016–2017, Texas Instruments Incorporated...

  • Page 5: References

    HSDC Pro GUI Updates (SLWC106), available at www.ti.com/tool/dataconverterpro-sw NOTE: The EVM schematics, layout, and BOM are available on the ADC32RF45EVM tool page on www.ti.com. SLAU620D – April 2016 – Revised August 2017 ADC32RFxx-EVM Submit Documentation Feedback Copyright © 2016–2017, Texas Instruments Incorporated...

  • Page 6: Quick Start Guide

    (on-board LMX2582) is shown. The last section covers the steps to supply an internally-generated sample clock to the ADC, by either the LMK04828 or LMX2582. ADC32RFxx-EVM SLAU620D – April 2016 – Revised August 2017 Submit Documentation Feedback Copyright © 2016–2017, Texas Instruments Incorporated...

  • Page 7: Software Installation

    TI website. 5. Extract the files from the zip file, run HSDC Pro Patch vx.xx.exe and follow the installation instructions. SLAU620D – April 2016 – Revised August 2017 ADC32RFxx-EVM Submit Documentation Feedback Copyright © 2016–2017, Texas Instruments Incorporated...

  • Page 8: Hardware Setup Procedure

    Bandpass Filter Low-Noise TSW14J56EVM Power Supply +5 VDC at 3 A PC Running HSDC Pro Figure 2. ADC32RFxx-EVM GUI Bench Setup Block Diagram ADC32RFxx-EVM SLAU620D – April 2016 – Revised August 2017 Submit Documentation Feedback Copyright © 2016–2017, Texas Instruments Incorporated...

  • Page 9: Quick-Start Procedure For Bypass Lmfs82820 Mode In Adc32Rf45

    Figure 3. ADC32RFxx-EVM GUI LMK04828 PLL1 Page Bypass Mode 4. On the ADC32RFxx-EVM, press SW1 (ADC RESET) to provide a hardware reset to the ADC. SLAU620D – April 2016 – Revised August 2017 ADC32RFxx-EVM Submit Documentation Feedback Copyright © 2016–2017, Texas Instruments Incorporated...

  • Page 10: Adc32Rfxx-Evm Quick Setup View Bypass Mode

    8. Select ADC32RF45 Mode. In this example, Bypass is chosen. 9. Select Resolution. In this example, 12 bit is selected. 10. Press PROGRAM EVM. ADC32RFxx-EVM SLAU620D – April 2016 – Revised August 2017 Submit Documentation Feedback Copyright © 2016–2017, Texas Instruments Incorporated...

  • Page 11: High Speed Data Converter Pro (Hsdc Pro)

    1. Open High Speed Data Converter Pro (v4.5 or newer) by going to Start Menu → All Programs → Texas Instruments → High Speed Data Converter Pro. 2. Click OK to connect to the TSW14J56. If there is more than one TSW14J56 connected to the host PC, select the appropriate serial number of the board to be programmed.
  • Page 12 9. Click the Capture button in HSDC Pro to capture data from the ADC. 10. The result should match the example capture in Figure Figure 7. Example Capture from Channel A – Bypass Mode ADC32RFxx-EVM SLAU620D – April 2016 – Revised August 2017 Submit Documentation Feedback Copyright © 2016–2017, Texas Instruments Incorporated...

  • Page 13: Quick-Start Procedure For Digital Ddc (Decimation Plus Nco) Mode In Adc32Rf82

    USB. Whenever the USB link is disturbed, the GUI must obtain a new handle to address the proper USB port, and the Reconnect? button does that. SLAU620D – April 2016 – Revised August 2017 ADC32RFxx-EVM Submit Documentation Feedback Copyright © 2016–2017, Texas Instruments Incorporated...
  • Page 14 5. Click on the Quick Setup tab. 6. Select the Nyquist Zone for the input. It will be 2nd Nyquist in this example setup (Fs=2000M, Fin=1860M). ADC32RFxx-EVM SLAU620D – April 2016 – Revised August 2017 Submit Documentation Feedback Copyright © 2016–2017, Texas Instruments Incorporated...
  • Page 15 7. Select the Clock Source to ADC. In this example, External Clocking is selected. 8. Select ADC32RF45 Mode. In this example, DDC is chosen. 9. Press the PROGRAM EVM button. SLAU620D – April 2016 – Revised August 2017 ADC32RFxx-EVM Submit Documentation Feedback Copyright © 2016–2017, Texas Instruments Incorporated...
  • Page 16 10. After pressing the PROGRAM EVM button, the device will be configured as shown in Figure 9 Figure Figure 10. ADC32RFxx-EVM GUI JESD204B Configuration Tab DDC Mode ADC32RFxx-EVM SLAU620D – April 2016 – Revised August 2017 Submit Documentation Feedback Copyright © 2016–2017, Texas Instruments Incorporated...
  • Page 17 FFT capture, the sampling frequency and the NCO frequency must be known in order to know where the input tone should be located in the final FFT result. SLAU620D – April 2016 – Revised August 2017 ADC32RFxx-EVM Submit Documentation Feedback Copyright © 2016–2017, Texas Instruments Incorporated...

  • Page 18: High Speed Data Converter Pro (Hsdc Pro)

    High Speed Data Converter Pro (HSDC Pro) 1. Open High Speed Data Converter Pro by going to Start Menu → All Programs → Texas Instruments → High Speed Data Converter Pro. 2. Click OK to connect to the TSW14J56. If there is more than one TSW14J56 connected to the host PC, select the appropriate serial number of the board to be programmed.
  • Page 19 16. If this popup is used, the frequency values entered must be exact. Figure 16. Popup Window for Setting HSDC Pro Decimation Factor and NCO Frequency SLAU620D – April 2016 – Revised August 2017 ADC32RFxx-EVM Submit Documentation Feedback Copyright © 2016–2017, Texas Instruments Incorporated...
  • Page 20 Quick-Start Procedure for Digital DDC (Decimation Plus NCO) Mode in ADC32RF82 www.ti.com Figure 17. Example Capture From Channel A – 8x Decimation Mode ADC32RFxx-EVM SLAU620D – April 2016 – Revised August 2017 Submit Documentation Feedback Copyright © 2016–2017, Texas Instruments Incorporated...

  • Page 21: Quick-Start Procedure For Digital Ddc (Decimation Plus Nco) Mode In Adc32Rf4X And Adc32Rf8X

    USB. Whenever the USB link is disturbed, the GUI must obtain a new handle to address the proper USB port, and the Reconnect? button does that. SLAU620D – April 2016 – Revised August 2017 ADC32RFxx-EVM Submit Documentation Feedback Copyright © 2016–2017, Texas Instruments Incorporated...
  • Page 22 5. Click on the Quick Setup tab. 6. Select the Nyquist Zone for the input. It will be 2nd Nyquist in this example setup (Fs=2949.12M, Fin=1960M). ADC32RFxx-EVM SLAU620D – April 2016 – Revised August 2017 Submit Documentation Feedback Copyright © 2016–2017, Texas Instruments Incorporated...
  • Page 23 7. Select the Clock Source to ADC. In this example, External Clocking is selected. 8. Select ADC32RF45 Mode. In this example, DDC is chosen. 9. Press the PROGRAM EVM button. SLAU620D – April 2016 – Revised August 2017 ADC32RFxx-EVM Submit Documentation Feedback Copyright © 2016–2017, Texas Instruments Incorporated...
  • Page 24 10. After pressing the PROGRAM EVM button, the device is configured as shown in Figure 19 Figure 20, indicating the 12-bit packed, 5-sample mode for LMFS82820. Figure 20. ADC32RFxx-EVM GUI JESD204B Configuration Tab DDC Mode ADC32RFxx-EVM SLAU620D – April 2016 – Revised August 2017 Submit Documentation Feedback Copyright © 2016–2017, Texas Instruments Incorporated...
  • Page 25 FFT capture, the sampling frequency and the NCO frequency must be known in order to know where the input tone should be located in the final FFT result. SLAU620D – April 2016 – Revised August 2017 ADC32RFxx-EVM Submit Documentation Feedback Copyright © 2016–2017, Texas Instruments Incorporated...

  • Page 26: High Speed Data Converter Pro (Hsdc Pro)

    High Speed Data Converter Pro (HSDC Pro) 1. Open High Speed Data Converter Pro by going to Start Menu → All Programs → Texas Instruments → High Speed Data Converter Pro. 2. Click OK to connect to the TSW14J56. If there is more than one TSW14J56 connected to the host PC, select the appropriate serial number of the board to be programmed.
  • Page 27 26. If this popup is used, the frequency values entered must be exact. Figure 26. Popup Window for Setting HSDC Pro Decimation Factor and NCO Frequency SLAU620D – April 2016 – Revised August 2017 ADC32RFxx-EVM Submit Documentation Feedback Copyright © 2016–2017, Texas Instruments Incorporated...
  • Page 28 Quick-Start Procedure for Digital DDC (Decimation Plus NCO) Mode in ADC32RF4x and ADC32RF8x www.ti.com Figure 27. Example Capture From Channel A – 8x Decimation Mode ADC32RFxx-EVM SLAU620D – April 2016 – Revised August 2017 Submit Documentation Feedback Copyright © 2016–2017, Texas Instruments Incorporated...

  • Page 29: Quick-Start Procedure For Bypass Lmfs8224 Mode In Adc32Rf44 And Internal Clocking

    6. Select the Nyquist Zone for the input. It will be 2nd Nyquist in this example setup (Fs = 2.4576M, Fin = 1800M). SLAU620D – April 2016 – Revised August 2017 ADC32RFxx-EVM Submit Documentation Feedback Copyright © 2016–2017, Texas Instruments Incorporated...
  • Page 30 11. Press PROGRAM EVM. 12. After pressing the PROGRAM EVM button, the device will be configured in 14 bit LMFS8224 LMFS mode. ADC32RFxx-EVM SLAU620D – April 2016 – Revised August 2017 Submit Documentation Feedback Copyright © 2016–2017, Texas Instruments Incorporated...

  • Page 31: High Speed Data Converter Pro (Hsdc Pro)

    1. Open High Speed Data Converter Pro (v4.5 or newer) by going to Start Menu → All Programs → Texas Instruments → High Speed Data Converter Pro. 2. Click OK to connect to the TSW14J56. If there is more than one TSW14J56 connected to the host PC, select the appropriate serial number of the board to be programmed.

  • Page 32: Quick-Start Procedure For Bypass Lmfs 42810 Mode In Adc32Rf42 With Internal Clocking

    6. Select the Nyquist Zone for the input. It will be 2nd Nyquist in this example setup (Fs = 1.536M, Fin = 900M). ADC32RFxx-EVM SLAU620D – April 2016 – Revised August 2017 Submit Documentation Feedback Copyright © 2016–2017, Texas Instruments Incorporated...
  • Page 33 11. Press PROGRAM EVM. 12. After pressing the PROGRAM EVM button, the device will be configured in 12-bit, LMFS 42810 LMFS mode. SLAU620D – April 2016 – Revised August 2017 ADC32RFxx-EVM Submit Documentation Feedback Copyright © 2016–2017, Texas Instruments Incorporated...

  • Page 34: High Speed Data Converter Pro (Hsdc Pro)

    1. Open High Speed Data Converter Pro (v4.5 or newer) by going to Start Menu → All Programs → Texas Instruments → High Speed Data Converter Pro. 2. Click OK to connect to the TSW14J56. If there is more than one TSW14J56 connected to the host PC, select the appropriate serial number of the board to be programmed.
  • Page 35 Quick-Start Procedure for Bypass LMFS 42810 Mode in ADC32RF42 With Internal Clocking www.ti.com Figure 33. Example Capture from Channel A – LMFS42810 Mode SLAU620D – April 2016 – Revised August 2017 ADC32RFxx-EVM Submit Documentation Feedback Copyright © 2016–2017, Texas Instruments Incorporated...

  • Page 36: Adc32Rfxx Internally Generated Clocking

    Figure 34. The rest of the steps in Section 3.2 must be followed. Figure 34. ADC32RFxx EVM GUI With LMX Clock Configuration ADC32RFxx-EVM SLAU620D – April 2016 – Revised August 2017 Submit Documentation Feedback Copyright © 2016–2017, Texas Instruments Incorporated...

  • Page 37: Adc32Rf45 Evm Lmk04828 Clocking

    Figure 35. The rest of the steps in Section 3.2 must be followed. Figure 35. ADC32RFxx EVM GUI With LMK Clock Configuration SLAU620D – April 2016 – Revised August 2017 ADC32RFxx-EVM Submit Documentation Feedback Copyright © 2016–2017, Texas Instruments Incorporated...
  • Page 38 Added ADC32RF82 to list of supported devices in the abstract...... • Added Quick-Start Procedure for Digital DDC (Decimation Plus NCO) Mode in ADC32RF82 section. Revision History SLAU620D – April 2016 – Revised August 2017 Submit Documentation Feedback Copyright © 2016–2017, Texas Instruments Incorporated...
  • Page 39 STANDARD TERMS FOR EVALUATION MODULES Delivery: TI delivers TI evaluation boards, kits, or modules, including any accompanying demonstration software, components, and/or documentation which may be provided together or separately (collectively, an “EVM” or “EVMs”) to the User (“User”) in accordance with the terms set forth herein.
  • Page 40 FCC Interference Statement for Class B EVM devices NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Page 41 【無線電波を送信する製品の開発キットをお使いになる際の注意事項】 開発キットの中には技術基準適合証明を受けて いないものがあります。 技術適合証明を受けていないもののご使用に際しては、電波法遵守のため、以下のいずれかの 措置を取っていただく必要がありますのでご注意ください。 1. 電波法施行規則第6条第1項第1号に基づく平成18年3月28日総務省告示第173号で定められた電波暗室等の試験設備でご使用 いただく。 2. 実験局の免許を取得後ご使用いただく。 3. 技術基準適合証明を取得後ご使用いただく。 なお、本製品は、上記の「ご使用にあたっての注意」を譲渡先、移転先に通知しない限り、譲渡、移転できないものとします。 上記を遵守頂けない場合は、電波法の罰則が適用される可能性があることをご留意ください。 日本テキサス・イ ンスツルメンツ株式会社 東京都新宿区西新宿６丁目２４番１号 西新宿三井ビル 3.3.3 Notice for EVMs for Power Line Communication: Please see http://www.tij.co.jp/lsds/ti_ja/general/eStore/notice_02.page 電力線搬送波通信についての開発キットをお使いになる際の注意事項については、次のところをご覧ください。http:/ /www.tij.co.jp/lsds/ti_ja/general/eStore/notice_02.page 3.4 European Union 3.4.1 For EVMs subject to EU Directive 2014/30/EU (Electromagnetic Compatibility Directive): This is a class A product intended for use in environments other than domestic environments that are connected to a low-voltage power-supply network that supplies buildings used for domestic purposes.
  • Page 42 Notwithstanding the foregoing, any judgment may be enforced in any United States or foreign court, and TI may seek injunctive relief in any United States or foreign court. Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2017, Texas Instruments Incorporated...
  • Page 43 IMPORTANT NOTICE FOR TI DESIGN INFORMATION AND RESOURCES Texas Instruments Incorporated (‘TI”) technical, application or other design advice, services or information, including, but not limited to, reference designs and materials relating to evaluation modules, (collectively, “TI Resources”) are intended to assist designers who are developing applications that incorporate TI products;...
  • Page 44 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Texas Instruments ADC32RF82EVM...

This manual is also suitable for:

Adc32rf45-evmAdc32rf44-evmAdc32rf42-evmAdc32rf82-evmAdc32rf80-evm

Table of Contents