Texas Instruments ADC32RF45 EVM Quick Start Up Manual
Texas Instruments ADC32RF45 EVM Quick Start Up Manual

Texas Instruments ADC32RF45 EVM Quick Start Up Manual

Adc32rf45/rf80 evm

Advertisement

Quick Links

This user's guide is a quick-start guide for the ADC32RF45/RF80 EVM. The ADC32RFxx quick-start
procedure using ADC32RF45 bypass LMFS82820, and the ADC32RF80 quick-start procedure (digital
DDC block - decimation plus NCO) external clocking are detailed. A section covering ADC32RF4x/RF80
internally generated clocking is also included.
......................................................................................................................
1
1.1
1.2
1.3
1.4
2
2.1
2.2
2.3
3
3.1
3.2
3.3
4
4.1
4.2
4.3
5
5.1
5.2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Microsoft, Windows are registered trademarks of Microsoft Corporation.
LabVIEW is a trademark of National Instruments.
SLAU620A - April 2016 - Revised May 2016
Submit Documentation Feedback
ADC32RF45/RF80 EVM Quick Startup Guide
.................................................................................................
..................................................................................................
..........................................................................................................
............................................................................................................
..........................................................................................................
................................................................................................
.......................................................................................
...........................................................................................................
..................................................................................................
.........................................................................................................
.................................................................................................
List of Figures
.....................................................................................................
...................................................................................
.......................................................................................
...........................................................................
...................................................................................
............................................................................................................
Copyright © 2016, Texas Instruments Incorporated
SLAU620A - April 2016 - Revised May 2016
Contents
.............................................................
.................................................................
.................................................................
.....................................................................
........................................................
........................................................................
....................................................................
...........................................................................
.........................................................................
.................................................................
.........................................................................
...................................................................
.........................................................................
........................................................................
.................................................................
ADC32RF45/RF80 EVM Quick Startup Guide
User's Guide
......................................
..........
2
2
2
3
3
4
4
5
6
6
6
6
12
13
13
13
18
21
21
21
3
7
8
9
10
11
12
12
13
14
15
15
16
17
18
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ADC32RF45 EVM and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Texas Instruments ADC32RF45 EVM

  • Page 1: Table Of Contents

    ADC32RFxxEVM GUI JESD204b Configuration Tab Microsoft, Windows are registered trademarks of Microsoft Corporation. LabVIEW is a trademark of National Instruments. SLAU620A – April 2016 – Revised May 2016 ADC32RF45/RF80 EVM Quick Startup Guide Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated...
  • Page 2: Overview

    High Speed Data Converter Pro (HSDC Pro) software tool for high-speed data converter evaluation. The ADC32RF45 EVM is also designed to work with many of the development kits from leading FPGA vendors that contain an FMC connector.
  • Page 3: Evaluation Board Feature Identification Summary

    HSDC Pro GUI Updates (SLWC106), available at www.ti.com/tool/dataconverterpro-sw NOTE: The EVM schematics, layout, and BOM are available on the ADC32RFxxEVM tool page on www.ti.com. SLAU620A – April 2016 – Revised May 2016 ADC32RF45/RF80 EVM Quick Startup Guide Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated...
  • Page 4: Quick Start Guide

    Quick Start Guide www.ti.com Quick Start Guide The EVM test procedure to obtain a valid data capture from the ADC32RF45 EVM using the TSW14J56EVM capture card is provided in this section. This is the starting point for all evaluations. Introduction...
  • Page 5: Software Installation

    By default, the HSDC Pro revision 4.1 software does not support unreleased devices such as the ADC32RF45 or ADC32RF80 EVM. Newer revisions of HSDC Pro will begin to support the EVM once the EVM is publicly released for order from TI. Until the ADC32RF45 EVM is publicly released, to enable support for the EVM: 1.
  • Page 6: Hardware Setup Procedure

    Quick Start Guide www.ti.com Hardware Setup Procedure A typical test setup using the ADC32RF45 EVM and TSW14J56EVM is shown in Figure 2. This is the test setup used for the quick-start procedure. ADC32RFxx Quick-Start Procedure ADC32RF45 Bypass LMFS82820 Mode TSW14J56 1.
  • Page 7: Adc32Rfxxevm Gui Bench Setup Block Diagram

    Fs = 2.94912 GHz, 5-Sample Example This example captures data from channel A of the ADC32RF45 EVM sampling at 2.94912 GHz with a 1900-MHz input source. This procedure uses a .cfg file to set up the LMK04828 clock device first, and then another .cfg file to set up the ADC.
  • Page 8: Adc32Rfxxevm Gui Lmk04828 Pll1 Page

    Figure 3. ADC32RFxxEVM GUI LMK04828 PLL1 Page 4. Click on the Low Level View tab. 5. Click on the Load Config icon. ADC32RF45/RF80 EVM Quick Startup Guide SLAU620A – April 2016 – Revised May 2016 Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated...
  • Page 9: Adc32Rfxxevm Gui Low Level Page

    Figure 4. ADC32RFxxEVM GUI Low Level Page 6. Navigate to the provided file called LMK_ADC32RF45_LMF_82820_ExtClock.cfg and click OK. SLAU620A – April 2016 – Revised May 2016 ADC32RF45/RF80 EVM Quick Startup Guide Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated...
  • Page 10: Adc And Lmk Configuration Files

    ADC32RFxx main tab unless the Read All is performed.) 10. Go to the ADC32RFxx tab. ADC32RF45/RF80 EVM Quick Startup Guide SLAU620A – April 2016 – Revised May 2016 Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated...
  • Page 11: Adc32Rfxxevm Gui Adc Configuration Tab

    ADC32RFxx Quick-Start Procedure ADC32RF45 Bypass LMFS82820 Mode www.ti.com Figure 6. ADC32RFxxEVM GUI ADC Configuration Tab SLAU620A – April 2016 – Revised May 2016 ADC32RF45/RF80 EVM Quick Startup Guide Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated...
  • Page 12: High Speed Data Converter Pro (Hsdc Pro)

    1. Open High Speed Data Converter Pro (v4.2 or newer) by going to Start Menu → All Programs → Texas Instruments → High Speed Data Converter Pro. 2. Click OK to connect to the TSW14J56. If there is more than one TSW14J56 connected to the host PC, select the appropriate serial number of the board to be programmed.
  • Page 13: Adc32Rf80 Quick-Start Procedure (Digital Ddc Block - Decimation Plus Nco) External Clocking

    EVM.) SLAU620A – April 2016 – Revised May 2016 ADC32RF45/RF80 EVM Quick Startup Guide Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated...
  • Page 14: Adc32Rfxxevm Gui Lmk04828 Pll1 Page

    4. Click on the Low Level View tab. 5. Navigate to the provided file called LMK_ADC32RF4x_ExtClk.cfg and click OK. ADC32RF45/RF80 EVM Quick Startup Guide SLAU620A – April 2016 – Revised May 2016 Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated...
  • Page 15: Low Level Page

    ADC32RF80 Quick-Start Procedure (Digital DDC Block - Decimation Plus NCO) External Clocking www.ti.com Figure 11. Low Level Page Figure 12. ADC32RF4x/ADC32RF80 DDC Configuration Files SLAU620A – April 2016 – Revised May 2016 ADC32RF45/RF80 EVM Quick Startup Guide Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated...
  • Page 16: Adc32Rfxxevm Gui Adc Configuration Tab

    9. Go to the ADC32RFxx tab. The ADC32RFxx tab should look like Figure Figure 14, and Figure Figure 13. ADC32RFxxEVM GUI ADC Configuration Tab ADC32RF45/RF80 EVM Quick Startup Guide SLAU620A – April 2016 – Revised May 2016 Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated...
  • Page 17: Adc32Rfxxevm Gui Ddc Configuration Tab

    ADC32RF80 Quick-Start Procedure (Digital DDC Block - Decimation Plus NCO) External Clocking www.ti.com Figure 14. ADC32RFxxEVM GUI DDC Configuration Tab SLAU620A – April 2016 – Revised May 2016 ADC32RF45/RF80 EVM Quick Startup Guide Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated...
  • Page 18: High Speed Data Converter Pro (Hsdc Pro)

    1. Open High Speed Data Converter Pro (v4.2 or newer) by going to Start Menu → All Programs → Texas Instruments → High Speed Data Converter Pro. 2. Click OK to connect to the TSW14J56. If there is more than one TSW14J56 connected to the host PC, select the appropriate serial number of the board to be programmed.
  • Page 19 Hz. Another common mistake is to omit the 'M' in which case the frequency entered is in Hz. SLAU620A – April 2016 – Revised May 2016 ADC32RF45/RF80 EVM Quick Startup Guide Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated...
  • Page 20 20. If this popup is used, the frequency values entered must be exact. Figure 20. Popup Window for Setting HSDC Pro Decimation Factor and NCO Frequency ADC32RF45/RF80 EVM Quick Startup Guide SLAU620A – April 2016 – Revised May 2016 Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated...
  • Page 21: Adc32Rf4X/Rf80 Internally Generated Clocking

    1. Verify the clocking selection jumper JP3 is set to the INT position to select the clock to the ADC to be SLAU620A – April 2016 – Revised May 2016 ADC32RF45/RF80 EVM Quick Startup Guide Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated...
  • Page 22 Updated Example Capture from Channel A – 5 Sample Mode image............. • Updated Example Capture From Channel A – 8x Decimation Mode image. Revision History SLAU620A – April 2016 – Revised May 2016 Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated...
  • Page 23 STANDARD TERMS AND CONDITIONS FOR EVALUATION MODULES Delivery: TI delivers TI evaluation boards, kits, or modules, including any accompanying demonstration software, components, or documentation (collectively, an “EVM” or “EVMs”) to the User (“User”) in accordance with the terms and conditions set forth herein. Acceptance of the EVM is expressly subject to the following terms and conditions.
  • Page 24 FCC Interference Statement for Class B EVM devices NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Page 25 【無線電波を送信する製品の開発キットをお使いになる際の注意事項】 開発キットの中には技術基準適合証明を受けて いないものがあります。 技術適合証明を受けていないもののご使用に際しては、電波法遵守のため、以下のいずれかの 措置を取っていただく必要がありますのでご注意ください。 1. 電波法施行規則第6条第1項第1号に基づく平成18年3月28日総務省告示第173号で定められた電波暗室等の試験設備でご使用 いただく。 2. 実験局の免許を取得後ご使用いただく。 3. 技術基準適合証明を取得後ご使用いただく。 なお、本製品は、上記の「ご使用にあたっての注意」を譲渡先、移転先に通知しない限り、譲渡、移転できないものとします。 上記を遵守頂けない場合は、電波法の罰則が適用される可能性があることをご留意ください。 日本テキサス・イ ンスツルメンツ株式会社 東京都新宿区西新宿6丁目24番1号 西新宿三井ビル 3.3.3 Notice for EVMs for Power Line Communication: Please see http://www.tij.co.jp/lsds/ti_ja/general/eStore/notice_02.page 電力線搬送波通信についての開発キットをお使いになる際の注意事項については、次のところをご覧くださ い。http://www.tij.co.jp/lsds/ti_ja/general/eStore/notice_02.page SPACER EVM Use Restrictions and Warnings: 4.1 EVMS ARE NOT FOR USE IN FUNCTIONAL SAFETY AND/OR SAFETY CRITICAL EVALUATIONS, INCLUDING BUT NOT LIMITED TO EVALUATIONS OF LIFE SUPPORT APPLICATIONS.
  • Page 26 Notwithstanding the foregoing, any judgment may be enforced in any United States or foreign court, and TI may seek injunctive relief in any United States or foreign court. Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2015, Texas Instruments Incorporated...
  • Page 27 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue.
  • Page 28 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Texas Instruments ADC32RF45EVM ADC32RF80EVM...

This manual is also suitable for:

Adc32rf80 evm

Table of Contents