Clock Source - Bastl Instruments Thyme Manual

9/26/2018
Substep Editing
To modify a pattern on the substep level hold down the
substep you want to edit. After a short moment, the
status of the substep.
If a
PATTERN
the button will set the substep to Bypass.
If a
PATTERN
selected one (can be a regular Sound or Bypass). Pressing the button will set it to the
selected Sound.

Clock Source

The sequencer can run from one of the three different clock sources. Before a clock signal is
used for the sequencer it passes a clock divider.
Tap Tempo
Analog Clock
https://bastl-instruments.github.io/thyme/manual.html#/Introduction
LED is on, the corresponding substep is set to the selected Sound. Pressing
LED is off, the corresponding substep is set to a Sound different from the
Internally generated clock which can be set by pressing
Rising edges of signal passed to CLK input
Thyme Manual
button that holds the
1-8
LEDs will indicate the
PATTERN
TAP
31/48