Advertisement
9/26/2018
Step Editing
The
LEDs now indicate in which steps the selected Sound is active.
1-8
When an LED is on, at least one of the substeps holds the selected Sound. By shortly
pressing the corresponding button, set all substeps to Bypass.
When the LED is off, all substeps are set to a different Sound (another regular Sound or
Bypass). By shortly pressing the button, you set all substeps to the selected Sound.
Please note, that pressing a
So a long push alone does not trigger any action.
https://bastl-instruments.github.io/thyme/manual.html#/Introduction
Thyme Manual
button longer will let you enter substep editing mode.
1-8
30/48
Advertisement
