Bastl Instruments Thyme Manual page 27

9/26/2018
Playback
At any moment inside live mode, the currently active Sound is indicated by the
or the
BYPASS
Recording
When the sequencer is running, you temporarily overwrite Sound changes by pressing
and holding the corresponding
sequencer will continue playing the active pattern.
You can press multiple
active.
To record to the current pattern with your performance, hold down
pressing the
https://bastl-instruments.github.io/thyme/manual.html#/Introduction
LED.
1-8
buttons of the same time. The most recent one will always be
1-8
buttons. This is only possible while the sequencer is running.
1-8
Thyme Manual
button or . Once you release the button, the
BYPASS
LEDs
1-8
and keep
WRITE
27/48