Advertisement
9/26/2018
The dividers are independent of each other. So you can for example have option B activated
for the Tap Source and Option D for MIDI.
The selected clock source and clock dividers will not be reset by power cycling.
Set Clock Divider
To change the divider option for the selected clock source, hold down
of the
PATTERN
While holding down
the
PATTERN
Tap Tempo
When Tap is selected as a clock source, the speed of the sequencer can be set by the
button. The average time between two button presses will be taken as the time for one step .
If you hit the button only every few steps, this is interpreted as resync events only.
Furthermore, Thyme can be used as MIDI clock master when running from Tap clock.
Manual Resync
With any of the clock sources selected, hitting
and the active clock source. The detailed behavior is different for each clock source
Tap
Set both input clock and sequencer to the closest whole step.
triggered also during regular taps.
https://bastl-instruments.github.io/thyme/manual.html#/Introduction
buttons.
, the selected the divider and the divided clock signal is shown by
FN
LEDs.
Thyme Manual
triggers a resync between the sequencer
TAP
and press one
FN
TAP
19
20
This is
33/48
Advertisement
