Advertisement
9/26/2018
Spacing
Levels
Feedback
Filter
Wet/Dry
Volume
All parameters have their individual knobs, allowing you to tweak them all at the same time.
https://bastl-instruments.github.io/thyme/manual.html#/Introduction
Macro control to change the position of the three remaining read heads
together.
The read heads controlled by Spacing can have individual contributions to
the feedback and output signal. This knob controls all of them at
simultaneously. In the last quarter the loop gain is greater than one,
allowing self-excitation.
The sum of all the read heads is scaled by this factor before it will be fed
back to the input signal. On full, you get a loop gain of exactly one
(provided Levels is off).
Next to scaling, you can also lter the feedback and output signal. In the
lower half you control the cutoff frequency of a lowpass lter, in the upper
half it's a highpass. Right in the center position the lter is bypassed.
Mix between processed and unprocessed signal.
Control the overall output volume. This parameter is global but different
Sounds can add different modulations by their Robots.
Thyme Manual
4/48
Advertisement
