Advertisement
9/26/2018
After that the input is disconnected and will only be reconnected once you deactivate freeze
mode. There is now a closed loop with the tape and the feedback path.
The overall ampli cation of the loop is controlled by the
there will be a steady loop; if it is lower, the signal will fade out over time.
The signal from the three extra read heads is not mixed into the loop but only added to the
output. This way you can use them to spice up your loop but also go back to the clean version
at any time you wish. In the second half of the
signal from the extra read heads start to get mixed into the loop.
https://bastl-instruments.github.io/thyme/manual.html#/Introduction
Thyme Manual
FEEDBACK
knob this behavior changes and the
LEVELS
knob. When it is on full,
5
9/48
Advertisement
