Advertisement
9/26/2018
Write and Live Mode
There are two modes of operation for the sequencer that differ in the playback and recording
behavior.
In Live Mode you can temporarily overwrite the Sound and use live recording.
The Write Mode lets you precisely view the current position of the sequencer and set
individual steps.
Switch Between Live and Write Mode
You can switch between the two modes by pressing
indicated by the
write mode.
Live Mode
The aim of the live mode is to show the resulting Sound changes of the sequencer, perform
on top of a stored sequence and potentially record this performance into the sequence.
https://bastl-instruments.github.io/thyme/manual.html#/Introduction
LED. When it's off you are in live mode, when it's on you are in
WRITE
Thyme Manual
. The current mode is
WRITE
26/48
Advertisement
