Advertisement
9/26/2018
ID
ID
Name
Name
1
Knobs
2
Knob LEDs
3
Buttons
4
EEPROM
5
External
6
Bootloader
7
MIDI
https://bastl-instruments.github.io/thyme/manual.html#/Introduction
Description
Description
Set all knobs together at a
set of positions (off, center,
full). Once all reach the
target position the test
proceeds to the next
position. The knob LEDs
indicate when a knob has
reached its target position.
Knob LEDs fade in one after
another.
Press button closest to the
LED that lights up. Pressing
the wrong button is an error.
All bytes of EEPROM are
written to, read back and
compared with expected
value. Original data is
preserved. Shows progress
bar.
Connect external testing
utility to test CV, analog
clock and footswitch. Set in
this order: CV to center - 5
Clock edges - CV to off - 5
Footswitch presses - CV to
full
Tries to place lower board
into bootloader mode.
Connect MIDI cable between
input and output. Devices
sends random data and
checks if it can receive it.
Thyme Manual
Manual Check
Manual Check
Check if the knobs
reach the middle
position only when
they are set halfway to
assure they have the
correct curve
Smooth Fading
None
None
Unit should not react
on its own
None
None
Special
Special
Failure
Failure
Indication
Indication
None
None
LED closest
to button
that trigged
unexpectedly
is lit up.
None
None
None
None
47/48
Advertisement
