Advertisement
9/26/2018
Analog
Activate the rst step right now.
Clock
MIDI
Activate the rst step on the next MIDI clock message.
Parameter Overwrite
While the sequencer is running and switching between different sounds, it is possible to
change the parameters of the active sound by tweaking the knobs. Due to knob freezing this
is only useful if the sequencer is running rather slow.
Another performative option is to manually overwrite one or multiple parameters. This means
they will not be controlled anymore by the sounds of the pattern but directly by their knob.
Overwrite a Parameter
Parameter Overwrite is only active as long as the sequencer is running and you hold
down
SOUND
will start tracking the knob movement. It is possible to overwrite multiple parameters at
the same time.
To stop all parameter overwrites, release
control over all parameters. Disabling only a single parameter overwrite while keeping
the others active is not possible.
https://bastl-instruments.github.io/thyme/manual.html#/Introduction
. To start overwriting a parameter, twist the corresponding knob. The value
Thyme Manual
. The sequenced sounds will take back
SOUND
21
34/48
Advertisement
