Advertisement
9/26/2018
Set Robot Polarity
You can set the polarity of the selected Robot by holding down
pressing one of the buttons
pressed, the current polarity is indicated by an LED.
Robot Phase
When activating a Sound, all Robots are setup according to the settings stored for this
particular Sound. Robots set to oscillator-type Modes
are set to zero, so - for example in triangular Mode - the modulation is off at the very rst
moment and rises. This starting point can also be set to three other positions.
https://bastl-instruments.github.io/thyme/manual.html#/Introduction
Thyme Manual
/
/
FREEZE
LINK
SYNC
ROBOT SELECT
. While
ROBOT SELECT
13
also reset their outputs. Usually, they
and
is being
21/48
Advertisement
