Advertisement
9/26/2018
Change Extended Parameter Settings
To alter extended parameter settings, hold down
, or
FEEDBACK
current state of each setting is shown by the knob LED.
Sounds
There are eight Sounds and one Bypass Sound to switch between. The regular Sounds are
pre-con gured to "clean setting" - meaning all parameters are in a positions that don't affect
the signal and are waiting for your edits . The Bypass Sound will pass the input signal
unmodi ed to the output; only the global Volume parameter can be tweaked.
https://bastl-instruments.github.io/thyme/manual.html#/Introduction
knob which toggles the corresponding setting on/off. The
SPACING
Thyme Manual
and twist the
FN
6
,
TAPE SPEED
11/48
Advertisement
