Advertisement
9/26/2018
Delay Link
As the tape speed changes, it also takes a different amount of time for the tape to travel a
xed distance between write head and read head. Sometimes it might be desirable to keep
this time constant. With the
automatically adjusted when the tape speed changes in order to compensate for any effect
on the delay time . In other words: Tweaking the tape speed will not affect the nal delay
time.
Freeze Mode
The Freeze Mode turns Thyme into a looping device. To achieve this, the owgraph is
dynamically recon gured and some parameters slightly change their meaning:
Once you trigger the
freeze mode enabled), the clean input signal is written to the tape for the time equal to the
main read head's delay time. During that period the feedback and delay knob LEDs are turned
off. The input signal is also routed directly to the output.
https://bastl-instruments.github.io/thyme/manual.html#/Introduction
switch enabled, the position of the main read head will be
LINK
4
Mode (either by activating it or by activating a Sound that has
FREEZE
Thyme Manual
8/48
Advertisement
