Printhead Adjustments; Printhead Position Adjustment - Honeywell MP Nova Mark II User Manual

Printhead Adjustments

Printhead Position Adjustment

MP Nova Mark II User Guide
Note: These adjustments are only necessary when changing to media with a
different thickness or width. The pictures shown describe an MP Nova4 DT. The
process works the same for all MP Nova Mark II printers.
Changing the position of the adjustment screws may be necessary if the labels
are very narrow.
1 Check that the printer is turned off. Open the cover and fold the handle.
2 Loosen the upper nut of the adjustment screw that is to be moved by turning
it counter-clockwise.
3 Slide the adjustment screw into a new position and tighten the upper nut.
Pull the handle if sliding the adjustment screw past the finger nut.
Chapter 5 — Printer Operation
47