Software (5-1-4); Battery History (5-1-5); Test (5-2) - Husqvarna Automower 210 C Technical Manual

2. SPECIAL MENU FUNCTIONS

Software (5-1-4)

This sub-menu contains information about the
software (mower program's) version, the control box
version and date of issue. The version consists of
both the edition and the program type. The edition
number is stated as a combination of four numbers,
for example, Ver 02.71. The program type states
which type of mower program Automower
programmed with. B states the control box version.

Battery history (5-1-5)

This sub-menu contains information about the
battery's capacity. In order to check the capacity of
the battery, the battery needs to be fully discharged.
For more information, see Battery check on page 20.
The four most recent battery checks are saved in
Battery history.
Switch between the four display modes by using
Arrow up or Arrow down.

2.7.2 Test (5-2)

You can use this function to manually test how well
the components in the Automower
are shown on the display during testing.
The sub-menu consists of four part menus which
address the test of power and motors, user interface,
loop and sensors.
is
®
work. The values
®
Operating data
Trip Op. counters
Fault messages
Software
Battery history
5-1-4
Operating data
Trip Op. counters
Fault messages
Software
Battery history
5-1-5
Operating history
Test
Live data
Demo mode
Loop detection
Special settings
5-2
AMG2
Ver: xx.xx B:
Date:
Time:
Date:
Capacity:
Chargings OK:
Batt. Temp:
Power & Motors
User interface
Loop
Sensors
5-2-
English - 35