Husqvarna Automower 210 C Technical Manual page 117

7. MAINTENANCE AND SERVICE
Table 10: Service diagram 220 AC, 230 ACX, Solar Hybrid and 260 ACX
No. Check/Action
3. Clean under the body: Inside and
outside of the drive wheels, around
the front wheel axles and the
chassis.
Solar Hybrid: also clean the solar
panel by wiping it using a damp
cloth.
260ACX: Clean the ultrasonic
sensors with a dry cloth or similar.
Check the blades and screws.
4.
5. Check the two lower front wheel
bearings.
6. Check the rubber bellows on the
cutting height adjustment. The
rubber bellows must not be
damaged.
7. Check the movability and function
of the collision sensors, liftsensor
and the front body suspension.
8. Check the rubber cap on the main
switch. The rubber cap must not be
damaged.
9. Check that the mower has the latest
edition and correct version of the
mower program.
10. Check that the two halves of the
chassis have been sealed together
properly. Remove the body and
split the chassis halves. As needed,
lubricate the two halves of the
chassis (m/2003-2009) or replace
with rubber packing (m/2010-). Also
check the contents of the chassis;
wipe off any condensation and dirt.
11. Make an Auto test of all
components.
Check on site that docking and
12.
charging work correct.
13. Perform a battery check
For Replaced parts
information,
see:
page 115
Operator's
manual for
Automower
®
page 115
page 115
page 39
page 94
Quick check
page 26 and
page 77
7.3 Sealing
the chassis
halves, page
116
page 67
page 19
page 19
English - 117