Husqvarna Automower 210 C Technical Manual page 57

With the help of a guide wire, the Automower
hand, there is a risk of the mower not finding its way out of the area if it does not find the guide wire and
start to follow it before the delay time for the boundary wire has elapsed. From Area 2 the Automower
normally find the charging station by using the Irregular search method. With an increased corridor width
for the boundary wire the mower, when searching, will run past several passages instead of running
through them, which is an advantage in Area 2.
Fully approved
Follow loop Boundary wire
Delay 18 minutes
Corridor width 15
Example number 5
In this example the guide loop is longer than 300 metres (1000 ft). There is a risk that the Automower
stops following the guide wire. The charging station should therefore be moved.
Non approved
Follow loop Boundary wire
Delay 11 minutes
Corridor width 6
3. INSTALLATION
finds the charging station easily from Area 1. On the other
®
3m (10ft)
3m (10ft)
2
15
1m (3ft)
6
Guide wire
3 minutes
6
3m (10ft)
3m (10ft)
1m (3ft)
Guide wire
7 minutes
6
1
15
Follow loop out Area 1
Direction Guide
Distance 10 metres (30 ft)
Proportion 50 %
1
Follow loop out Area 1
Direction Guide
Distance 10 metres (30 ft)
Proportion 50 %
will
®
®
English - 57