Husqvarna Automower 210 C Technical Manual page 118

Table 11: Service schedule 210 C
No. Check/Action
1. Carefully clean the cable entries in
the body to ensure the rubber seals
sit correctly.
Check the bearings, bearing cage
2.
and hub in the skid plate. Clean
between the skid plate and blade
disc as well as between the blade
disc and the rubber bellows.
Clean under the body: Inside and
3.
outside of the drive wheels, around
the front wheel axles and the
chassis.
4. Check the blades and screws.
5. Check the front wheel bearings.
6. Check the rubber bellows on the
cutting height adjustment. The
rubber bellows must not be
damaged.
7. Check the charging strips and
contact strips.
Check the movability and function
8.
of the collision sensors, liftsensor
and the front body suspension.
9. Check the rubber cap on the main
switch. The rubber cap must not be
damaged.
10. Check that the two halves of the
chassis have been sealed together
properly. Remove the body and
split the chassis halves. As needed,
lubricate the two halves of the
chassis (m/2003-2009) or replace
with rubber packing (m/2010-).
Check that the mower has the latest
edition and correct version of the
mower program.
Make an Auto test of all
11.
components.
12. Check on site that Charging works
correctly.
Perform a battery check
13.
118 - English
7. MAINTENANCE AND SERVICE
For Replaced parts
information,
see:
page 115
page 115
Operator's
manual for
Automower
®
page 115
page 115
page 90
page 39
7.3 Sealing
the chassis
halves
page 116
Quick check
page 26 and
page 77
page 67
page 19
page 19