Husqvarna Automower 210 C Technical Manual page 10

Blades
The blades must be in good condition to obtain the
best mowing result. In order to keep the blades sharp
for as long as possible it is important to keep the lawn
free from branches, small stones and other objects.
Poor or dull blades can result in the grass bending
instead of being mown, the tops become frayed and
Automower may find it difficult to mow a large
®
working area. Besides, the lawn can become
extremely rumpled and uneven.
It is more important to have well-kept and sharp
blades on an Automower
lawn mower. It is the principle of the Automower
cutting the grass instead of knocking it off that makes
this difference. The double ground blades and a mower
program that rotates the blade disc in both directions
increase the life of the blades.
All five blades and screws must be replaced at the
same time to ensure the cutting system is balanced.
There are several different types of mower blades to
choose from as accessories, with different features.
Use Husqvarna AB approved blades only, see the
table.
Blade type
Stainless steel
(two-toothed, stainless)
Carbon steel
(two-toothed , can be sharpened)
Carbon steel
(two-toothed, reversible, extra robust, can be
sharpened)
CAUTION! Dull knives of type 535 13 87-01, 535 13 88-01 and 505 12 78-01 should not be polished or shar-
pened and then reused. This will reduce the risk of an imbalanced mowing system.
Irregular mowing pattern
The Automower ® mows the lawn in an irregular
pattern. This gives a very even mowing result. In
addition, there are no distinctive tracks left in the
lawn, which is often the case when using a
conventional lawn mower.
10 - English
1. FUNCTION
® , than on a conventional
®
Quantity/Packaging
9
30
500
9
30
500
9
30
300
Part number
535 13 87-01
535 13 88-01
505 12 78-01
535 13 87-02
535 13 88-02
535 12 78-02
522 85 16-02
522 85 17-02
522 85 18-02