Husqvarna AUTOMOWER 220 AC Operator's Manual
  1. Manuals
  2. Brands
  3. Husqvarna Manuals
  4. Lawn Mower
  5. AUTOMOWER 220 AC
  6. Operator's manual

Husqvarna AUTOMOWER 220 AC Operator's Manual

Husqvarna auto mower operator's manual
Hide thumbs Also See for AUTOMOWER 220 AC:
Table of Contents

Advertisement

Quick Links

H U SQVARNA AUTOMOWE R
™
230 ACX / 220 AC
OPE R ATOR'S MAN UAL

Advertisement

Table of Contents
loading

Related Manuals for Husqvarna AUTOMOWER 220 AC

Summary of Contents for Husqvarna AUTOMOWER 220 AC

  • Page 1 H U SQVARNA AUTOMOWE R ™ 230 ACX / 220 AC OPE R ATOR’S MAN UAL...

  • Page 2: Table Of Contents

    TABLE OF CONTENTS 1. Introduction and safety 1.1 Introduction 1.2 Symbols on Automower™ 1.3 Symbols in the Operator’s Manual 1.4 Safety instructions 2. Presentation 2.1 Automower™, what’s what? 2.2 Function of Automower™ 2.3 Search method 2.4 More than one Automower™ in a garden 2.5 One Automower™...
  • Page 3 TABLE OF CONTENTS Husqvarna AB has a policy of continuous product development and therefore reserves the right to modify the design and appearance and function of products without prior notice. This Operator's Manual deals with version 2.4x of the mower’s control program.

  • Page 4: Introduction And Safety

    1.1 Introduction Congratulations on your choice of an exceptionally high quality product. To get the best results from your Husqvarna Automower™ requires knowledge of its function. This Operator's manual contains important information about the mower, how you install it and how you use it.

  • Page 5: Symbols On Automower

    1. INTRODUCTION AND SAFETY 1.2 Symbols on Automower ™ These symbols can be found on the lawn mover. Study them carefully so you understand their significance. • Read through the Operator’s Manual carefully and understand the content before using your Automower.

  • Page 6: Symbols In The Operator's Manual

    1. INTRODUCTION AND SAFETY 1.3 Symbols in the Operator’s Manual These symbols can be found in the Operator’s Manual. Study them carefully so you understand their significance. • Inspection and/or maintenance must be carried out with the main switch set to OFF . •...

  • Page 7: Safety Instructions

    1. INTRODUCTION AND SAFETY 1.4 Safety instructions • Please read the Operator's Manual carefully and make sure you understand the instructions before using Automower. • It is not permitted to modify the original design of Automower. All modifications are made at your own risk.
  • Page 8 1. INTRODUCTION AND SAFETY Transport The original packaging should be used when transporting Automower over long distances. To safely move from or within the working area: Press the STOP button to stop the mower. If the stop protection, (see page 59) used to prevent theft, has been activated enter the first number of the PIN code.

  • Page 9: Presentation

    The wire is also used for any guide wires. The wire supplied with the installation is 400 m long (250 m for 220 AC). If this is not sufficient more wire can be purchased, with a connector, and spliced onto the existing wire.

  • Page 10: Automower™, What's What

    2.1 Automower™, what’s what? The numbers in the picture correspond to: Charging strip Cutting height adjustment cover Catch button to open the cutting height adjustment cover Front wheel Drive wheel Body Stop button Keypad Display 10. Main switch 11. Handle 12.

  • Page 11: Function Of Automower

    Up to about 25 °C a fully charged Automower mows for approximately 60 - 90 minutes, (40 - 60 minutes for 220 AC), depending on the age of the battery and the thickness of the grass. The mower then charges for 45 - 60 minutes. Above 25 °C both the mowing and charging times gradually drop.
  • Page 12 2. PRESENTATION Working method Automower automatically mows the lawn. It continuously combines mowing and charging. The charging station sends out a signal that Automower can sense at a distance of 6 - 7 metres. The mower starts to search for the charging station when the battery charge becomes too low.
  • Page 13 2. PRESENTATION The STOP button on the top of Automower is mainly used to stop the mower when it’s running. When the STOP button is pressed a cover opens, behind which there is a control panel. The STOP button remains depressed until the cover is closed again.

  • Page 14: Search Method

    Movement pattern The mower’s movement pattern is irregular and is determined by Automower itself. A movement pattern is never repeated. This mowing system means the lawn is mown equally without any mowing lines. If Automower enters an area where it senses the grass is longer than earlier, it can change the movement pattern.

  • Page 15: More Than One Automower™ In A Garden

    Search method 2: Follow boundary wire utomower runs irregularly until it reaches the boundary wire. The mower then follows the boundary wire in to the charging station. This search method is best for an installation that has an open lawn with wide passages (wider than about 3 metres) and no, or only a small, island.

  • Page 16: Installation

    3. INSTALLATION 3. Installation This chapter describes how you install Husqvarna Automower™. Before starting the installation read the previous chapter 2. Presentation. Read the whole of this chapter too before starting the installation. How the installation is made also affects how well Automower will work.

  • Page 17: Preparations

    3.1 Preparations If the lawn in the proposed working area is taller than 10 cm, mow it using a normal lawn mower. Then collect the clippings. Read carefully through all the steps before the installation. Check that all parts for the installation are...
  • Page 18 The charging station must be positioned on relatively level ground. The height difference must not differ more than 5 cm between the front and rear of the charging station. The charging station must not be positioned so that its plate bends. Consider the distance to a wall socket when choosing the position.
  • Page 19 Avoid placing the charging station in a narrow passage (narrower than about 3 metres). Do not position the charging station so that the mower can come closer than 3 metres behind the charging station (for example on a narrow point). The mower will not then find the charging station.
  • Page 20 Connect the low voltage cable to the charging station. Only use original cable and transformer. Connect the low voltage cable to the transformer. The connectors may be slightly difficult to connect, as they are moisture-proof. Connect the transformer’s power cord to a 230V wall socket.

  • Page 21: Charging The Battery

    3.3 Charging the battery Automower is supplied with an uncharged battery. As soon as the charging station is connected, it is possible to charge the mower. Set the main switch to the OFF position. Place Automower in the charging station to charge the battery while you are laying the boundary wire.
  • Page 22 Boundaries for the working area If a high obstacle, for example a wall or fence, borders the working area, the boundary wire should be laid 35 cm from the obstacle. This will prevent Automower from colliding with the obstacle and reduce body wear.
  • Page 23 If the working area borders against a flat path or the like that lies level with the lawn, it is possible to allow Automower to run a little over the path. The boundary wire should then be laid 10 cm from the edge of the path.
  • Page 24 Boundaries within the working area Use the boundary wire to demarcate areas inside the working area by creating islands around obstacles that can not withstand a collision, for example, flower beds and fountains. Run the cable out to the area, route it around the area to be demarcated and then back along the same route.
  • Page 25 Passages when mowing Long narrow passages and areas, narrower than 1.5 - 2 metres, should be avoided. When Automower mows there is a risk that it runs around in the passage or area for a too long a period. The lawn will then look flattened.
  • Page 26 3. INSTALLATION The boundary wire should not be laid across a slope that is steeper than 10 %. There is a risk of Automower finding it difficult to turn there. The mower will then stop and show the fault message Outside working area.
  • Page 27 • Mow the lawn where the wire is to be laid using a normal lawn mower or a trimmer. It will then be easier to lay the wire close to the ground and the risk of the mower cutting the wire off is reduced.
  • Page 28 Laying the boundary wire in towards the charging station The boundary wire can be routed in several different ways in towards the charging station. The best alternative is to route the wire completely outside the charging station, see alternative 1. The wire can also be placed under the charging station plate as shown in alternative 2 in the illustration.

  • Page 29: Connecting The Boundary Wire

    3.5 Connecting the boundary wire Connect the boundary wire to the charging station: Lift up the cover on the charging station: • Grip under the edge of the cover with both hands and pull straight out towards the sides. • Now lift the cover straight up. Slide in the ends of the boundary wire in the lowermost holes on the charging station and catch them in the uppermost holes.
  • Page 30 Place the cable ends in the connector: • Open the connector. • Place the wire in the connector grip. Press the connector together using a pair of pliers. Press until you hear a click. Cut off any surplus boundary wire. Cut 1 - 2 cm above respective connectors.

  • Page 31: Checking The Installation

    Refit the cover on the charging station. Ensure the three guides on the charging station enter the right holes in the cover. 3.6 Checking the installation Check the loop signal by looking to see what indication the green LED on the charging station is giving.

  • Page 32: Installation Of The Guide Wire

    3.8 Installation of the guide wire The guide wire is an extra wire that is laid from the charging station, out towards a remote part of the working area or through a narrow passage and is then connected to the boundary wire. The same wire used for the boundary wire is also used for the guide wire.
  • Page 33 In the text below the guide wires are called guide 1 and guide 2, as is the case on the rear of the charging station (220 AC only has guide 1). Check that the charging station has the best placement.
  • Page 34 The longer the guide wire, the closer the mower follows the guide wire. If the guide wire is longer then 300 metres, the mower may find it difficult to follow the wire. This varies depending on the design of the garden and installation. Lift up the cover on the charging station.
  • Page 35 If you shall install the guide wire through a passage: • Automower follows the guide wire on the same side of the wire both to and from the charging station. This means that in towards the charging station the guide wire is on the right side of the mower and away from the charging station the guide wire is on the left side of the mower.

  • Page 36: Use

    4. Use 4.1 Charging a discharged battery When Husqvarna Automower™ is new or has been stored for a long period the battery will not be charged and needs to be charged before starting. Charging takes between 1 1/2 and 2 1/2 hours.

  • Page 37: Using The Timer

    4.2 Using the timer The lawn should not be cut too often to obtain the best mowing result. Use the timer function (see 6.4 Timer (2) on page 47) to avoid a downtrodden lawn and to get the maximum life from your Automower. For example, the quality of your lawn will improve if it is mown every other day instead of 12 hours each day.

  • Page 38: Restart

    4.5 Restart Restart within 20 seconds Close the control panel cover. Automower starts automatically. Restart after more than 20 seconds If more than 20 seconds has elapsed since the last time the STOP button or the keypad was pressed it is not possible to start Automower by just closing the cover.

  • Page 39: Adjusting The Cutting Height

    4.7 Adjusting the cutting height The cutting height can be varied from MIN (2 cm) to MAX (6 cm). If the grass is long it is appropriate to let Automower start mowing at the MAX cutting height. Once the grass is shorter, you can gradually lower the cutting height.

  • Page 40: Control Panel

    5. Control panel All forms of commands and settings for Husqvarna Automower™ are made via the control panel. All functions are accessed via a number of menus. The control panel consists of a display and a keypad. All information is shown on the display and all input is done using the buttons.

  • Page 41: Shortcuts

    The keypad consists of five groups of buttons: Shortcuts, program, selection, numbers and the main switch. 5.1 Shortcuts Home: • Sends the mower to the charging station. Where it stays until the button is pressed again. The house icon is lit on the right-hand side of the display when the button is pressed.

  • Page 42: Programs

    5.2 Programs Under the program buttons you can save sets of different settings, to reuse or to simplify the use of Automower in several gardens. Under respective buttons there are some preset settings. You can choose to use these or change them. •...

  • Page 43: Numbers

    5.4 Numbers Used in the menu structure to enter settings, for example, PIN code, time or exit direction. Also used to specify a number series as a shortcut to the different menus. See more about number series in Number series on page 45. 5.5 Main switch 10.

  • Page 44: Menu Functions

    6.5 Garden (3) 6.6 Settings (4) The numbers in brackets refer to the menu rows on the display of the Husqvarna Automower™. There are a number of submenus under each option. You can access all the functions to set Automower settings via these.

  • Page 45: Automower™ Main Menu, Menu Overview

    6. MENU FUNCTIONS 6.2 Automower™ main menu, menu overview 46 - English...

  • Page 46: Commands (1)

    Friday - Sunday. • Week timer (2-4) to select which days of the week Automower should mow. Commands Timer Garden Settings for 220 AC). Commands Timer Garden Settings Charge then AUTO Show latest faults Make factory sett. Timer override Day timer...
  • Page 47 Timer override (2-1) If you set the timer on your Automower, you can use this function to temporarily abandon the settings. • YES (2-1-1) Move the cursor to YES and press YES to turn off the timer function. • NO (2-1-2) Move the cursor to NO and press YES to turn on the timer function.

  • Page 48: Garden (3)

    6. MENU FUNCTIONS Week timer (2-4) Use the YES button to select/deselect the days you would like Automower to mow/not mow. Automower will mow on the days prefixed by a checkmark. • Mon (2-4-1) • Tue (2-4-2) • Wed (2-4-3) •...
  • Page 49 Exit angles (3-1) Normally Automower leaves the charging station in a direction within the exit sector 90°-270°, where 90° is called the Start angle and 270° is called the End angle. By setting the start and end angles, you can set the direction in which Automower is to leave the charging station.
  • Page 50 6. MENU FUNCTIONS • Proportion first (3-1-6) When you use two exit sectors: Specify a percentage to define on how many occasions Automower should leave the charging station in sector 1. To test the settings in Exit angles: State the value 100 % for Proportion first when sector 1 is to be tested.
  • Page 51 Up to five remote areas can be activated: Area 1, Area 2, Area 3, Area 4 and Area 5 (only three areas on 220 AC). Three values need to be stated to activate an area: • Direction Specify to the right, left, guide 1 or guide 2 depending on which direction the area lies from the charging station.
  • Page 52 The mower does not change the search method: If the mower starts to follow the boundary wire it will not switch to follow a guide wire. (Automower 220 AC only has guide 1) Follow loop out Exit angles Follow loop in...
  • Page 53 • Corridor width (3-2-3) The Corridor width setting defines the distances from the mower's path to the boundary wire or the guide wire when following these to/from the charging station. The area beside the wires used by the mower is called the Corridor. A low corridor width value represents a narrow corridor while a high value represents a wide corridor.
  • Page 54 6. MENU FUNCTIONS • Test IN (3-2-4) The Test IN (3-2-4) function is used to test how Automower finds its way into the charging station. When the function is selected the mower will immediately follow the boundary wire, guide 1 or guide 2, depending on which one it finds first, in to the charging station.
  • Page 55 To find out the distance from the charging station to a remote area: • State a distance that easily exceeds the true distance. The maximum distance that can be stated is 500 metres. State the value 100 % for Proportion for the area to which the distance is to be measured.
  • Page 56 6. MENU FUNCTIONS Advanced (3-4) • Check loop (3-4-1) This function allows you to check the mower’s signal reception from the boundary wire, and to determine exactly where in the lawn the boundary wire is routed. The sensor used for this function sits concealed directly under the catch button for the cutting height adjustment cover.

  • Page 57: Settings (4)

    6.6 Settings (4) From this option in the main menu you access the settings. • Security (4-1) to make settings concerning the PIN code, stop protection, settings lock and alarms. The PIN code must be specified for the Security menu to be shown.
  • Page 58 6. MENU FUNCTIONS • Activate: Move the cursor to Time lock and press YES. Now move the cursor to Number of days and press YES. Specify how many days you would like Automower to mow before it requests the PIN code. Finish by pressing YES. When the selected number of days has elapsed, Automower completes mowing and charges the battery.
  • Page 59 • Settings lock (4-1-4) This function prevents any one who does not know the PIN-code from changing any of the settings. It also prevents the A, B or C programs from being selected or saved. • Activate: Move the cursor to Settings lock and press YES.
  • Page 60 6. MENU FUNCTIONS Sound 2 beeps/10 seconds 5 beeps over 2 seconds 3 beeps/second One long beep Short click sound Muffled long beep Short double beep Language (4-3) Using this function you can change the language selection you made when Automower was first started.
  • Page 61 Time and date (4-4) Using this function you can change the time and date on Automower. You can also change the format selections you made when Automower was first started via this function. • Set time (4-4-1) Move the cursor to Set time and press YES. Now enter the correct time and finish with YES.

  • Page 62: Garden Example

    Adapting the mower's garden settings according to the shape of the garden makes it easier for the Husqvarna Automower™ to frequently reach all parts of the garden and in doing so achieve a perfect mowing result.
  • Page 63 Proposals for installation and settings Area: 1,800 m . No guide wire is necessary. Timer: Operating time of 24 hours per day. Exit angles: One sector 90°-270°. Search method: Irregular and Follow boundary wire in. Delay: Guide 1 7 minutes, Guide 2 7 minutes and boundary wire 11 minutes.
  • Page 64 7. GARDEN EXAMPLE Proposals for installation and settings Area: 600 m . L-shaped garden with the charging station placed in the narrow area. There are two islands. No guide wire is necessary. Timer: Operating time of 8 hours per day. Exit angles: Sector 1 70°...
  • Page 65 Proposals for installation and settings Area: 500 m . There are several islands. No guide wire is necessary. The mower’s default settings do not need to be changed. Timer: Operating time of 7 hours per day. Exit angles: One sector 90°- 270°. Search method: Irregular.
  • Page 66 7. GARDEN EXAMPLE Proposals for installation and settings This example only applies to 230 ACX. Area: 3000 m . Two guide wires are recommended. Timer: Operating time of 24 hours per day. Exit angles: One sector 90° - 270°. Follow loop out: Area 1; Direction Guide 1, Distance 40 m and Proportion 20 %.

  • Page 67: Maintenance

    8. Maintenance Check and clean the Husqvarna Automower™ regularly and replace worn parts if necessary to improve operating reliability and to ensure a longer service life. For further information on cleaning, see 8.5 Cleaning on page 70. During the initial period Automower is used the blade disc, skid plate and blades should be checked once a week.

  • Page 68: Winter Storage

    8.2 Winter storage Automower™ Automower must be carefully cleaned before winter storage, see 8.5 Cleaning on page 70. Charge the battery fully before winter storage. Turn the main switch to the OFF position. Store the mower horizontally on all four wheels in an area that is dry and free from frost, preferably in the original packaging.

  • Page 69: Cleaning

    8.5 Cleaning It is important to keep Automower clean. A mower with a large amount of clippings negotiates slopes very poorly. Never use a high-pressure washer or even running water to clean Automower. We recommend a brush and spray with water. Underframe and blade disc Set the main switch to the OFF position.

  • Page 70: Replacing The Blades

    Wheels Clean around the front and rear wheels and around the front wheel suspension. Body Use a damp, soft sponge or cloth to clean the body. If the body is very dirty it may be necessary to use a soap solution or washing-up liquid. 8.6 Replacing the blades WARNING Always use originalblades and...
  • Page 71 To replace the blades: Set the main switch to the OFF position. Wear protective gloves. Turn Automower upside down. Rotate the skid plate so that its hole aligns with the screw for the blade. Unscrew the blade. Use a straight slot or cross-tip screwdriver.

  • Page 72: Trouble Shooting

    9. TROUBLE SHOOTING 9. Trouble shooting 9.1 Fault messages A number of fault messages are listed below that can be shown on the Husqvarna Automower™. If the same fault occurs frequently: contact your dealer. Fault message Cause Left wheel motor...
  • Page 73 Fault message Cause Outside working area If this occurs in isolated areas it may be due to interference from metallic objects (perimeter fence, reinforcement bar) or buried cables in the vicinity. The working area slopes too much. The boundary wire has been routed the wrong way around an island.

  • Page 74: Fault Symptom

    9. TROUBLE SHOOTING 9.2 Fault symptom If your Automower does not work correctly, follow the trouble shooting guide below. If the fault persists; contact your dealer. Symptom Cause Uneven mowing Automower works too few hours per results day. Working area too large. Dull blades.

  • Page 75: Technical Data

    Cutting width Working capacity 11. Environmental information The symbol on the Husqvarna Automower™ or its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.

  • Page 76: Eu Declaration Of Conformity

    Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declares under sole responsibility that the automatic lawn mower Husqvarna Automower™ from year 2007 serial numbers and onward (the year is clearly stated in plain text on the rating plate with subsequent serial number), conforms with the requirements of the COUNCIL’S DIRECTIVE:...
  • Page 77 12. EU DECLARATION OF CONFORMITY 78 - English...

  • Page 78: Index

    13. Index Advanced ...57 Alarm ...59 Arrow down ...43 Arrow up ...43 AUTO ...42 Automower More than one in a garden ...16 One in several gardens ...16 Technical data ...76 What’s what ...11 Automower runs at the wrong time ...75 Automower runs, but the blade disc does not rotate .75 Automower vibrates ...75 Battery...
  • Page 79 Earth fault-breaker ...19 End angle ...50 Exit angles ...50 Exit sector ...50 Factory settings Automower ...47 Fault messages ...47 Fault symptom ...75 Flat path ...24 Flower beds ...25 Follow loop ...51 Follow loop in ...16 Follow loop out ...51 Garden ...49 Advanced settings ...57 Check loop ...57 Corridor width ...54...
  • Page 80 Passages Charging station ...20 Exit sector ...50 When mowing ...26 When searching ...26 PIN code ...58 Pools of water ...24 Positioning Charging station ...18 Positioning transformer ...19 Preparations Installation ...18 Program buttons ...43 Program icon ...41 Programs ...43 Proportion first ...51 Proportion in Follow loop out ...52 Replace blades ...71 Reset factory settings Automower ...47...
  • Page 81 Timer override ...48 Transformer ...19 Connect low voltage cable ...21 Installation ...19 Positioning ...19 Presentation ...10 Transport Safety instructions ...9 Trapped ...73 Trees ...25 Trouble shooting ...73 Trouble Shooting Guide symptom ...75 Underframe ...70 Uneven mowing results ...75 Upside down ...74 Change cutting height ...40 Safety instructions ...8 Use Automower ...37...
  • Page 82 AUTOMOWER is a trademark owned by Husqvarna AB. Copyright © 2006 HUSQVARNA. All rights reserved. www.automower.com...

This manual is also suitable for:

Automower 230 acxSolar hybrid

Table of Contents