Trip Operation Counters (5-1-2); Fault Messages (5-1-3) - Husqvarna Automower 210 C Technical Manual

Search times
Information about how long a search for the charging
station has taken. The list shown contains the times
of the last 18 search events.

Trip Operation counters (5-1-2)

Trip Op. counters contains the same information as
Operating data above. The difference is that in Trip
Op. counters it is possible to reset all values, just as a
trip meter in a car.
To reset:
• Place the cursor on Reset trip and press YES.
Now press YES to the question Reset trip
operation counters?.
All values are reset and the date of the reset is
shown in the right-hand column of the display.
NOTE! When Trip Op. counters is reset, the value for
Chargings OK, is also reset, i.e. the battery's age,
both in the main counter and in the trip counter. If the
value for Chargings OK, see page 35, is to remain an
indicator of the battery's total age, Trip Op. counters
should only be reset when replacing the battery.

Fault messages (5-1-3)

This part menu contains the following information:
By date
a list containing 50 of the latest registered fault
messages sorted by date with the last fault to occur
first. Each message is shown with the date and time.
Switch between fault messages by using Arrow up or
Arrow down.
Reset fault
a function to delete all saved fault messages. To
reset: Place the cursor on Reset fault and press YES.
Now press YES when asked Reset fault counter?.
The message Clearing fault log is shown for a few
seconds.
34 - English
2. SPECIAL MENU FUNCTIONS
Key data
Search times
Operating data
Trip Op. counters
Fault messages
Software
Battery history
5-1-2
Operating data
Trip Op. counters
Fault messages
Software
Battery history
5-1-3
Key data
Reset trip
By date
Reset fault