Getting Started With Polycom Realpresence Group Series; Realpresence Group System Power - Polycom RealPresence Group 300 User Manual

®
Getting Started with Polycom
®
RealPresence Group Series
This guide includes information about Polycom RealPresence Group Series systems.
It includes information that helps you whether you're just starting to learn about video conferencing or if you
just need a quick refresher. It also includes step-by-step instructions for everyday video conferencing tasks.
All RealPresence Group Series systems, except the 700 systems, support 1080p60 performance for people
or for content at one time. RealPresence Group 700 systems support 1080p60 performance for people and
content at the same time.
For detailed information on the available systems and bundles, as well as the most recent feature
descriptions, refer to the Polycom RealPresence Group Series Release Notes available at
support.polycom.com.
Note: Options are enabled by your administrator
RealPresence Group systems and Polycom touch devices can be configured to show only those options
used in your organization. Therefore, this guide might cover options that you cannot access on your system.
To find out more about these options, speak to your administrator.

RealPresence Group System Power

Powering your system on and off is a simple procedure, but it is important to perform the tasks in a certain
order.
Make sure that the system is powered off before you connect devices to it. After you have connected all of
the related equipment that you intend to use, connect the power cable and power on the RealPresence
Group system.
It is important to note that RealPresence Group Series systems do not have what you might think of as a
power button—they have a power proximity sensor. Instead of pressing an actual button that moves, you
touch the sensor (or near the sensor) that indicates power on the front of the system.
Polycom, Inc. 3