Polaris MATRIX INDY VR1 Series Owner's Manual page 182

MAINTENANCE
e
7. Remove the battery shield .
8. Remove the battery from the battery bracket.
BATTERY INSTALLATION
When installing a new battery, make sure it's fully charged prior to its initial use.
Using a new battery that has not been fully charged can damage the battery and
result in a shorter life. It can also hinder vehicle performance. Follow the battery
charging instructions before installing the battery.
1. Ensure that the battery is fully charged.
2. Set the battery in the battery holder.
3. Place the battery shield on the battery bracket.
4. Install the battery hold-down strap.
5. Connect and tighten the red (positive) cable first.
6. Connect and tighten the black (negative) cable last.
CAUTION
Verify the battery cables and wiring harness do not come into contact with the
brake disc. Move the wiring harness/cables behind the chassis tube and away
from the brake disc.
180