Polaris MATRIX INDY VR1 Series Owner's Manual page 177

SKI ALIGNMENT
Improper ski alignment or adjustment may cause loss of steering control,
resulting in serious injury or death. Do not attempt to change the ski alignment
or camber adjustment. Your POLARIS dealer can assist.
1. Place the handlebars in a straight-ahead position.
2. With only vehicle weight compressing the suspension, measure 10 inches
(25.4 cm) forward from the center of the ski mounting bolt (see in illustration
below). At this point, measure between the skis. This is measurement
3. Perform the same measurement rearward from the center of the ski
mounting bolt. This is measurement
q
4. The measurement should be 1/8 inch (3 mm) greater than the
measurement. If the skis are misaligned, your dealer can assist with
alignment correction as camber adjustment may also be affected.
WARNING
w
.
MAINTENANCE
q
w
.
175