Polaris MATRIX INDY VR1 Series Owner's Manual page 10

INTRODUCTION
POLARIS snowmobiles are engineered to conform to these SAE® standards.
Our muffler systems are designed to reduce noise levels and must not be
altered or removed. The sound of your snowmobile may not be welcome to non-
snowmobilers, so you have a responsibility to operate your snowmobile with
concern for others. We do our part by manufacturing quieter machines; we ask
your help to further reduce the impact of noise by operating your snowmobile
safely and responsibly.
AIR POLLUTION
POLARIS engineers continuously investigate ways to reduce emission levels of
two-stroke engines. We expect our efforts to lead to the reduction of potential air
pollution.
In addition to our technological research, we encourage government agencies,
manufacturers, distributors, dealers, ecologists, and other interested parties to
work together to develop data on environmental topics.
VEHICLE IDENTIFICATION NUMBERS
Record your snowmobile's identification numbers and key number in the spaces
provided.
If installing an aftermarket tunnel wrap, do not cover the tunnel certification,
tunnel VIN or emissions certification labels with the wrap. If the tunnel wrap
doesn't provide an opening for these labels, remove the section of wrap where
q
Certification Label
w
Tunnel VIN
e
Emission Certification Label
VEHICLE MODEL NUMBER:
TUNNEL VIN (RIGHT SIDE OF TUNNEL):
ENGINE SERIAL NUMBER (ON RECOIL
HOUSING):
KEY NUMBER:
8
NOTICE
the labels are located.