Polaris MATRIX INDY VR1 Series Owner's Manual page 51

FEATURES
Change Method 2
1. Press and release the SET button or SET switch until the odometer appears
in the information display area.
2. Press and hold the SET button or SET switch until the units change.
SECURITY SYSTEM (IGNITION LOCK SYSTEM)
This system is an optional feature and will not function until it has been activated
by your authorized POLARIS dealer. If you have this feature activated, you can
lock the ignition to prevent unauthorized use when leaving the snowmobile
unattended. A locked system will limit engine speed to 3000 RPM, which
prevents clutch engagement, and the snowmobile will not move when throttle is
applied.
If you wish to use this feature, you must complete all four tasks on the following
pages to have your system activated and to change the security code to one of
your own choosing.
FIRST TIME USE OF YOUR SECURITY SYSTEM
Perform all tasks in the order shown if you wish to activate and use the optional
security system.
TASK 1: Activate the security system
See your authorized POLARIS dealer to have the optional security system
feature activated in the electronic control unit (ECU).
TASK 2: Lock the System the First Time
NOTICE
To lock the system for the first time, use code 000.
49