Polaris MATRIX INDY VR1 Series Owner's Manual page 88

RIDE COMMAND DISPLAY
• For phones, shows signal strength.
• Listen to music over a headset or through optional vehicle speakers.
Ensure that your smartphone Bluetooth® settings are set to share phone calls,
media audio, text messages, and contact information.
There is no built in microphone in the display. Phone call audio will play
through the phone speakers or Polaris approved headset if connected. Some
dial options may be unavailable at speeds greater than 3 MPH.
IPHONE
To connect your iPhone to the display, do the following:
1. In your iPhone settings turn on Bluetooth®. If available, make your phone
discoverable to other devices in your iPhone's Bluetooth® settings. When
your phone appears on the display press the "+" button next to it.
2. A prompt will appear on your iPhone requesting permission to pair with your
phone.
3. Ensure the confirmation code on the screen and your phone are the same
then press "Pair" on your phone.
4. For optimal experience, enable notifications and sync contacts from your
smartphone's Bluetooth® settings.
ANDROID
To connect you Android device to the display, do the following:
1. From your smartphone settings, open the Bluetooth® options on your device
and ensure that Bluetooth® is turned on.
On some phones you have to make the phone visible to other devices. If your
phone has this feature, it should show up on the Bluetooth® connection screen
of your phone. If no option exists to make your phone visible to the display, it is
2. Press the add device button, then press "OK" on the display.
3. When your phone appears on the display press the "+" button next to it to
pair with your phone.
86
NOTICE
NOTICE
NOTICE
already visible to the display.