Polaris MATRIX INDY VR1 Series Owner's Manual page 131

If the brake lever is squeezed tightly enough, the lock will move freely into
The parking brake light on the gauge will light up if the parking brake lever lock is
set while the engine is running. It will also be lit when the service brake is in use.
If the parking brake light does not come on when the parking brake or service
brake is in use, have it serviced by your dealer.
LOCK RELEASE
To release the lock, squeeze the brake lever tightly. The lock will return to the
unlocked position.
If the parking brake lever lock is partially or entirely engaged while riding, the
brakes may overheat, resulting in brake damage. In extreme cases it could
cause a fire, which could result in serious injury or death. Always ensure that
the lever lock is completely disengaged before operating the snowmobile.
OIL INJECTION SYSTEM
Always check and fill the oil bottle during pre-ride inspection and refueling.
Serious engine damage can occur without the proper lubrication. Check the oil
bottle level often during the first tank of fuel. If the oil level doesn't go down,
contact your dealer or other certified technician immediately.
TRACK
Track damage or failure caused by operation on ice or poor lubrication
conditions voids the track warranty.
Operating the snowmobile with a damaged track increases the possibility of
track failure, which could cause loss of control resulting in serious injury or
death. Always inspect the track for damage before using the vehicle.
place. Do not force the lock or it may break.
PRE-RIDE INSPECTIONS
NOTICE
WARNING
NOTICE
WARNING
129