Polaris MATRIX INDY VR1 Series Owner's Manual page 65

ACTIVATE HEATED GRIPS
To activate the smartwarmers in the
handlebars, press the Heated Grips
q
button on the left hand controls.
There are four heat levels to choose
from:
• Low
• Medium
• High
• Off
SET GRIP TEMPERATURE
The temperature of each heat level can be customized using your gauge or
hand controls. Use the following procedure to adjust the temperature of your
heated hand grips.
1. Start the engine.
2. Press and hold the center
3. Press and release the MODE button until HEATERS is displayed in the
information display area.
Using the Gauge Buttons
1. Press and release the MODE button to select which smartwarmer to
customize: grips or thumb. Press the SET button to select.
2. Press and release the MODE button to choose a heat level: low, medium, or
high. Press the SET button to select.
3. Use the SET and MODE buttons to increase/decrease the temperature to
desired setting.
• MODE decreases the temperature.
• SET increases the temperature.
4. Press the Polaris Button to lock in temperature.
5. Press the MODE button to advance to the next heat setting.
6. Repeat steps 3-5 for each setting: low, medium, and high.
7. Press the Polaris Button to exit.
8. Press and release the SET or Polaris button to exit. The grips will adjust to
the temperatures of the new settings when the hand grip warmers are
enabled.
Using the Left Hand Controls
button to enter the Options Menu.
FEATURES
63