Polaris MATRIX INDY VR1 Series Owner's Manual page 106

RIDE COMMAND DISPLAY
MAINTENANCE
CARE AND MAINTENANCE
To clean the display shell, use a soft cloth with mild soap and water. Do not use
harsh or abrasive cleaners. For best results, use a micro-fiber towel to clean the
screen.
Certain products will damage the screen and other plastic surfaces. Do not use
alcohol to clean the display. Immediately clean off any gasoline that splashes
VEHICLE STORAGE
When preparing the vehicle for storage make sure the ignition switch is in the
OFF position to prevent battery drain and diminished battery life.
SPEED LIMITATION
Various aspects of the display such as the front and rear cameras, phone
contacts, and call logs may be unavailable while driving at high speeds.
UPDATE SOFTWARE
Before updating the Display, always export your existing rides and waypoints
To update the software, do the following:
ON YOUR PERSONAL COMPUTER
1. Go to ridecommand.polaris.com/update.
2. Log into your account, or create a new account.
3. Using the Vehicle Identification Number (VIN), add your new Polaris vehicle
to your Garage.
4. Locate and download the latest software to a USB flash drive (8+ GB).
ON YOUR VEHICLE
1. Connect the USB flash drive to the USB cable and power up your vehicle.
2. On the RIDE COMMAND display, select the Settings menu on your display
by pressing the POLARIS icon at the top of the screen.
3. Select General Settings, then Update Software.
104
NOTICE
on the display.
NOTICE
to a USB drive to avoid losing them.