Maintenance - OnRobot SG User Manual

MAINTENANCE

9. Maintenance
WARNING:
An overall inspection of the OnRobot's End of Arm Tooling must be performed
regularly and at least once every 6 months. This inspection must include but is
not limited to check for defective material and clean gripping surfaces.
Use original spare parts, and original service instructions for the OnRobot's End
of Arm Tooling and the robot. Failure to comply with this precaution can cause
unexpected risks, resulting in severe injury.
If you have questions regarding spare parts and repair, please visit our website
www.onrobot.com
9.1. SG
For the SG Base Part
WARNING:
Please, clean the SG Base Part regularly by using a cloth and a cleaning agent
with a pH value between 6-8.
When cleaning the SG Base Part please keep it mounted on the robot to
prevent water getting into the connector.
After cleaning, use a cloth and clean water, to rinse of any leftover cleaning
agent.
Please ensure that the used cleaning agent does not contain chlorine as this
can lead to corrosion.
WARNING:
On a regular basis, check that the silicone bellow has not come loose from
neither the aluminum base nor the Smart Lock male. If the bellow is not sitting
correctly, this can lead to water seeping into the SG base part.
to contact us.
65