Deep Clean Mode - Henny Penny LVE-102 Operation Manual

4-2. AIF CLOCK
(Continued)

4-3. DEEP CLEAN MODE

Jan. 2008
In 12-hour clock mode, there are three items on each line: the start time
"XX:XX", the A or P (am/pm) setting, and the "XX" duration. Use the
and ��������������������������������
To set a new start time setting, use the product buttons
Press the button to step over to the AM/PM setting. The A or P can
be toggled by pressing the '0' product button.
Press the button again to step over to the duration value
(in minutes). Enter a new value using the product buttons,
In 24-hour clock mode, there are only two items on each line: the time
(XX:XX) and the duration (XX). Again, the
you between these items.
Press the right-side X button to exit out of AIF Clock programming mode.
Put on protective gear: Be sure to use all McDonald's approved
safety equipment including, apron, face shield and gloves.
Never begin Deep Clean process until you're wearing all safety
gear. Hot oil or water can cause severe burns.
1. Cover adjoining vats to avoid accidentally contaminating oil with
fryer Deep Clean solution.
Do not cook product in an adjoining vat when the Deep Clean
process is in progress to avoid contaminating the oil and product.
2. Press and hold
display, followed by ENTER CODE.
3. �������������������������������
"SELECTN" show in the displays.
4. Press button twice and "DEEP CLEAN" shows in the displays.
ü
Press button and display shows "DEEP CLN?", along with
ü
"YES NO". Press
6.
4-4
Model LVE-102, 103, 104
, to enter the new value.
.
and
and buttons until LEVEL - 1 shows in the
button. Full vat fryers continue onto step
cted.
buttons step