Cooking With Multi-Product Display - Henny Penny LVE-102 Operation Manual

3-6. COOKING WITH
MULTI-PRODUCT
DISPLAY
3-7. CHANGING FROM
BREAKFAST TO
LUNCH or LUNCH TO
BREAKFAST
July 2007
A multi-product display means, a product must be selected before
starting a cook cycle in a particular vat.
1. Once out of the Melt Cycle, LOW TEMP�������������
temperature has been reached. Then the display shows "---- ----".
2. Press a product button, for ex:
in the oil.
3. Display shows "FR FRIES". If display shows "<<<< >>>>", oil
temperature is not correct for that product. Either select another
product, or press and hold
4. Press a timer button
5. When cook cycle is complete, the alarm sounds and display shows
"PULL".
6. Press the timer button under "PULL", to stop alarm. Display
then shows "---- ----", or if a quality timer (hold time) has been
programmed, the display shows the timer counting down (see step
6, Section 3-5).
This procedure is basically changing the product being cooked in a vat
with a dedicated display.
Breakfast to Lunch
1. Press product button, for ex:
2. Display shows "<<<< >>>>".
3. Press and hold a timer button
then "FR FRIES" shows in display.
Lunch to Breakfast
1. Press product button, for ex:
2. Display shows "<<<< >>>>".
3. Press and hold a timer button
then "HASH BRN" shows in display.
During a cooking cycle, if an attempt is made and fails to change a
product in a dedicated display or multi-product display, the set-point
temperatures of the products are not the same. Wait until the cook
cycle is complete, and then perform the change procedure.
3-9
Model LVE-102, 103, 104
and product now can be placed
or for 5 seconds.
or .
.
or for 5 seconds and
.
or for 5 seconds and