Password; Alert Tone - Henny Penny LVE-102 Operation Manual

5-3. PASSWORD

5-4. ALERT TONE (and
volume)
Dec. 2007
The 4-digit passwords can be changed for access to Set-Up, Usage,
Level 1, Level 2, & Get Mgr.)
1. Press and hold
display, followed by ENTER CODE.
2. �����������������������������
"COMP" show in the displays.
3. Press button twice and "PASSWORD" shows in the display.
ü
4. Press right button and "SET UP" shows in display. The Set up
password can be changed at this time, or press
the USAGE password, twice for LEVEL 1 password, 3 times for
LEVEL 2 password, or 4 times for GET MGR password. And then,
follow instructions below.
5. If the password for the Set Up Mode (for example) is to be
changed, press right
shows in the display. Press right
4-digit password for the Set Up Mode, using the product buttons
6. Once new password is entered, "CONFIRM PASSWORD" shows
ü
in the display. Press
another password.
1. Press and hold
the display, followed by "ENTER CODE".
2. �����������������������������
"COMP" show in the displays.
3. Press button 3 times and "ALERT TONE" shows in the display.
ü
4. Press right button and "VOLUME" shows in the display,
along with the volume value. Use the product buttons
(loudest).
5. Once volume is set, press
display, along with the tone value. Use the product buttons
6. Press X to exit Alert Tone Mode.
5-3
Model LVE-102, 103, 104
and buttons until LEVEL - 2 shows in the
ü
button and "MODIFY? "YES NO"
ü
button to change the
.
��������������
and buttons until "LEVEL - 2" shows in
to set the volume from 1 (softest) to 10
ü
button and "TONE" shows in
to set the tone from 50 to 2000 Hz.
once to change
X to choose