3-14A Discarding Oil From Vat Using Rti - Henny Penny LVE-102 Operation Manual

3-14a. DISCARDING OIL
FROM VAT USING
RTI
Closed
Figure 1
Figure 2
Aug. 2009
WITH PROLONGED USE, THE FLASHPOINT OF
SHORTENING IS REDUCED. DISCARD SHORTENING
IF IT SHOWS SIGNS OF EXCESSIVE SMOKING OR
FOAMING. SERIOUS BURNS, PERSONAL INJURY, FIRE,
AND/OR PROPERTY DAMAGE COULD RESULT.
NOTE: ENSURE DISPOSE IS SET TO RTI
1. Press and hold
MENU*", along with "1.AUTO FILTER?".
2. Press and release
3. Press
Open
4. Press
��������������
"CAUTION IS THERE OIL IN PAN? YES NO" may show in
display. Make sure drain pan is empty before proceeding )
Fish vat drain valves must be manually opened. Open the door and
turn the drain handle from the horizontal position to the vertical
position and the oil drains from the vat. Figure 1
5. Display then shows "VAT EMTY" "YES NO".
6. Press
OIL LINES" "
old oil is still in oil lines, press and hold
seconds. Once lines are clear, press X button and display shows
"CLN VAT COMPLETE" "YES NO".
7. ��������������������������������
shows "FILL POT FROM BULK" "YES NO". Open the door, that
has the RTI switch (Figure 2) and press and hold the "DISPOSE"
button on the R����������������������
8. T����������������
up to the lower oil indicator in vat, per Section 3-3.
9. Press X button and display shows "IS POT FILLED" "YES NO". If
vat is full, press
(on either side) until display shows "*FILTER
twice until display shows 3.DISPOSE.
ü
button and display shows DISPOSE? "YES NO".
ü
button and display shows "DRAINING" and oil drains
(If control suspects oil in drain pan
button and display shows "CLEAR OLD OIL FROM
ü
=PUMP" "X=DONE". To make sure no
ü
ü
button and controls return to normal operation.
3-16
Model LVE-102, 103, 104
button for a few
ü
ü
button until cold shortening is
.