Discarding Oil Using Optional Bulk Oil Dispose System - Henny Penny WENDY'S EVOLUTION ELITE EEE-151 Operator's Manual

Reduced oil capacity open fryer
Table of Contents

Advertisement

3-14. DISCARDING OIL
USING OPTIONAL BULK
OIL DISPOSE SYSTEM
Figure 1
Figure 2
Aug. 2011
1. Connect the female quick disconnect, that is attached to the
hose in the rear of the open fryer, to the correct male quick
disconnect at the wall. Once attached, the hose can remain
connected unless the open fryer is moved. Figures 1 & 2.
"BULK OIL DISPOSE?" in the Special Program Mode or
Set-Up Mode, must to set to "YES" for the Bulk Oil Dispose
System to operate. Also, a password code step (1, 2, 3) can
be added in Special Programming, SP-27.
2. Press and hold
until display shows"*FILTER MENU*",
along with "1.EXPRESS FILTER?".
3. Press and release
ü
"3.DISPOSE". Press
"YES NO", or enter code 1, 2, 3, if SP-27 is set to YES.
(If control suspects oil in drain pan "CAUTION IS THERE OIL
IN PAN? YES NO" may show in display. Make sure drain pan is
empty before proceeding).
ü
4. Press
button and "DRAIN VAT?" YES NO" shows in display
Press X button if drain pan already has oil in it. Skip to step 8.
ü
5. Press
button and display shows "OPEN DRAIN". Pull-out
on drain knob to open drain and display shows "DRAINING".
Oil now drains from the vat into drain pan.
6. Display shows "VAT EMTY "YES NO". Verify that vat is
ü
empty, and press
7. Display shows "CLEAR OLD OIL FROM OIL LINES"
ü
"
=PUMP" "X=DONE. Press and hold
seconds to clear old oil. Once cleared, press X button.
8. Display shows "CLN VAT COMPLETE" "YES NO". Once
ü
vat is clean, press
9. Display shows "DISPOSE" and then "
ü
Press
button.
10. Display shows "DISPOSING..." "X=STOP and oil is pumped
from drain pan to bulk oil container. When all oil is pumped
from pan, press X button (STOP).
11. Display shows "DISPOSE" and then "
Press X button; display shows "CLOSE DRAIN". Close drain.
34
button twice until display shows
button and display shows"DISPOSE?"
button.
ü
button.
ü
=PUMP" "X=DONE".
ü
=PUMP" "X=DONE".
button for a few

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents