Cooking With Multi-Product Display; Change From Breakfast To Lunch & Lunch To Breakfast - Henny Penny GVE-071 Operator's Manual

3-6
COOKING WITH
MULTI-PRODUCT
DISPLAY
3-7
CHANGE FROM
BREAKFAST TO
LUNCH OR LUNCH TO
BREAKFAST
July 2014
A multi-product display means, a product must be selected before start-
ing a cook cycle in a particular vat.
1.
Once out of the Melt Cycle, LOW TEMP flashes until the setpoint
temperature has been reached. Then the display shows "---- ----".
2.
Press a product button, for ex:
in the oil.
3.
Display shows "FR FRIES". If display shows "<<<< >>>>", oil
temperature is not correct for that product. Either select another
product, or press and hold
4.
Press a timer button
5.
When cook cycle is complete, the alarm sounds and display shows
"PULL".
6.
Press the timer button under "PULL", to stop alarm. Display
then shows "---- ----", or if a quality timer (hold time) has been
programmed, the display shows the timer counting down (see step
6, Section 3-5).
This procedure is basically changing the product being cooked in a vat
with a dedicated display.
Breakfast to Lunch
1.
Press product button, for ex:
2.
Display shows "<<<< >>>>".
3.
Press and hold a timer button
then "FR FRIES" shows in display.
Lunch to Breakfast
1.
Press product button, for ex:
2.
Display shows "<<<< >>>>".
3.
Press and hold a timer button
then "HASH BRN" shows in display.
During a cooking cycle, if an attempt is made and fails to change a product in
a dedicated display or multi-product display, the set-point temperatures of the
products are not the same. Wait until the cook cycle is complete, and then per-
form the change procedure.
17
and product now can be placed
or for 5 seconds.
or .
.
or for 5 seconds and
.
or for 5 seconds and