Turning On And Personalising The Pdm - Insulet Omnipod Dash User Manual

Turning on and personalising the PDM

1. Turn on the PDM by pressing and holding the Power button on the right side
until the Omnipod® logo appears. The PDM runs through a series of checks.
Caution: Do not turn off the PDM power. The PDM must be ON in order
to sound an alarm. If you press the Power button for too long, the PDM will
display a menu with a Power Off option. Do NOT tap Power Off. Tap outside
the menu to dismiss it and to keep the PDM on.
Note: You can press the Power button briefly to toggle the PDM between
the wake and sleep modes. Omnipod DASH™ System alarms will also wake
a PDM from sleep mode.
2. When a screen with the Omnipod DASH™ logo appears, use your finger to
swipe from left to right across the screen.
Note: If you see an unexpected screen instead of the Omnipod DASH™ logo
screen, see "Troubleshooting PDM Start-up" on page 175.
3. Tap a language to select your preferred language for the PDM screens. Then
tap the arrow (>).
4. Tap Select One to display the list of countries. Select your country, then tap
CONTINUE.
5. Review the terms and conditions, including the End User Licence Agreement
(EULA), Warranty and Legal Notices, as follows:
a. Tap the EULA, Warranty and Legal
Notices link to read the Omnipod
DASH™ System' s legal notices.
Then tap AGREE.
b. Tap the box to add a tick symbol.
c. Tap CONTINUE.
Note: If you are under 18, your parent
or guardian must accept for you.
6. Tap BEGIN SETUP.
7. Tap letters on the keypad to
enter a personalised screen
message (see "Selecting, Adding
and Deleting Items" on page 7).
Then tap the tick symbol.
Initial PDM Setup 2
Effective Date: 27SEP2019, ECO-000240
23