Omnipod DASH™ Insulin Management System 1
PDM Messages to You
The PDM can deliver alarm messages, notifications and confirmation messages.
Alarms
Hazard alarms and advisory alarms require your immediate attention
(see "Alarms, Notifications and Communication Errors" on page 109). If
you ignore an alarm, you could develop hypoglycaemia or hyperglycaemia.
Hazard alarms (
) are accompanied by a continuous vibration or tone
and interrupt anything else the PDM is doing except another hazard alarm.
For example, a hazard alarm is issued if the Pod runs out of insulin.
Advisory alarms (
) alert you to some aspect of the PDM or Pod that needs
your attention in the near future. For example, if the level of insulin in your Pod
is getting low, the PDM issues an advisory alarm.
Notifications
Notifications (
) remind you about actions you may want to perform
(see "Notifications List" on page 117). For example, you can set a reminder
to tell you to measure your blood glucose after a specified amount of time.
Confirmation Messages
The PDM confirms that an instruction was
successful by displaying a green banner with
a confirmation message. The confirmation
message disappears after several seconds.
Tip: Swipe to the right on the message to
dismiss it sooner.
If an instruction is not successful, the PDM
displays a communication error message
(see "Communication Errors" on page 120).
19
Effective Date: 27SEP2019, ECO-000240
Need help?
Do you have a question about the Omnipod Dash and is the answer not in the manual?
Questions and answers