Summary Of Settings And Options - Insulet Omnipod Dash User Manual

Appendix

Summary of Settings and Options

The options for the various Omnipod DASH™ Insulin Management System
settings are:
Time
Time zones
Date
Screen time-out
PIN
Maximum Basal Rate
Basal rate
Basal Programs
Basal rate segments
Temp basal
Temp basal (set to %)
Temp basal (set to U/hr) Range: 0 U/hr to Maximum Basal Rate in increments of
Temp basal presets
BG Goal Range for
blood glucose history
BG reminder
Custom reminder
Bolus Calculator
Target BG value
Correct Above threshold Maximum of 8 segments; Target BG to 11.1 mmol/L in
Minimum BG for Calcs 2.8 to 3.9 mmol/L in 0.1 mmol/L increments
Insulin-to-carb (IC)
ratio
Correction (sensitivity)
factor
Reverse Correction
176
12-hour or 24-hour clock.
GMT-11:00 to GMT+13:00.
MM. DD. YYYY
DD/MM/YYYY
DD. MM. YYYY
YYYY-MM-DD
30, 60, 120 seconds. Default is 30 seconds.
4 digits from 0 to 9.
0.05-30 U/hr. Default is 3.00 U/hr.
Units/hr. Range: 0 U/hr to Maximum Basal Rate in
0.05 U/hr increments.
Maximum of 12.
24 per Basal Program.
%, units/hr or Off. Default is Off.
Duration: 30 min to 12 hrs in 30-min increments.
Range: 100% decrease (0 U/hr) to 95% increase from
the current basal rate in 5% increments. Cannot exceed
the Maximum Basal Rate.
0.05 U/hr.
Maximum of 12.
Lower and upper limits: 3.9 to 11.1 mmol/L in
0.1 mmol/L increments.
On or Off. Default is Off.
Maximum of 4 active at once.
Reminder can occur between 30 min to 4 hrs after
bolus is started. Set in 30-minute increments.
Maximum of 4. Set to Daily, Once only, Off.
On or Off. Default is On.
Maximum of 8 segments; 3.9 to 11.1 mmol/L in
0.1 mmol/L increments.
0.1 mmol/L increments.
Default is 3.9 mmol/L.
Maximum of 8 segments; 1 to 150 g carb/U in
0.1 g carb/U increments.
Maximum of 8 segments; 0.1 to 22.2 mmol/L in
0.1 mmol/L increments. Default is 2.8 mmol/L.
On or Off. Default is On.
Effective Date: 27SEP2019, ECO-000240