Table of Contents
Advertisement
®
R&S
NRQ6
See
Chapter 4.6.1.3, "Setup with a PoE+
4.6
Connecting to a Controlling Host
For operating the R&S NRQ6, you can choose from various possibilities. For
details, see
Chapter 6, "Operating
The suitable interface depends on the controlling host:
● Computer
LAN interface
USB interface
● R&S NRX
Host interface
Contents:
●
Computer Using a LAN
●
Computer Using a USB
●
R&S NRX Base
4.6.1
Computer Using a LAN Connection
There are different ways to connect the R&S NRQ6 to a computer according to
the available equipment. The power for the R&S NRQ6 is supplied over the LAN
PoE+ interface.
Further information:
●
Chapter 4.5, "Connecting to a Power
●
Chapter 7, "Remote Control Interfaces and
Contents:
●
Setup with a PoE+ Ethernet
●
Setup with a PoE+ Injector and a Non-PoE+ Ethernet
●
Setup with a PoE+
●
Establishing a
●
Using
Hostnames............................................................................................23
●
Assigning the IP
Getting Started 1178.3705.02 ─ 07
Connection................................................................ 19
Connection................................................................25
Unit........................................................................................28
Switch................................................................ 20
Injector..............................................................................22
Connection...............................................................................22
Address................................................................................ 24
Connecting to a Controlling Host
Injector",
Concepts",
on page 39.
Supply",
on page 18
Protocols",
Preparing for Use
on page 22.
on page 51
Switch........................21
19
Advertisement
Table of Contents
