Table of Contents
Advertisement
®
R&S
NRQ6
If the R&S NRQ6 is in remote mode, the status is displayed next to the status
LED, see
Figure
Sensor information
(3) in
Figure 6-1
Serial number of the R&S NRQ6 and installed firmware version
Top pane
(4) in
Figure 6-1
Stays always visible.
Navigation pane
(5) in
Figure 6-1
For displaying measurement and system settings in the settings pane.
Settings pane
(6) in
Figure 6-1
Displays the settings you have selected in the navigation pane.
Result pane
(7) in
Figure 6-1
Displays the result for the selected measurement mode.
6.2.2
Tooltips
The web user interface provides tooltips on parameter functions and remote con-
trol commands.
If you place the cursor over the name of a parameter field, a short description of
the parameter function is displayed.
If you place the cursor over a parameter field, the short form of the corresponding
remote control command is displayed.
Getting Started 1178.3705.02 ─ 07
6-2.
Operating Concepts
Browser-Based User Interface
44
Advertisement
Table of Contents
