Clock I/O (Clk); Local Oscillator I/O (Lo) - R&S NRQ6 Getting Started

Frequency selective power sensor

Hide thumbs Also See for NRQ6:

Table of Contents

R&S

NRQ6

(output). Also, you can supply an external reference signal and use it as refer-

ence clock instead of the internal reference signal (input).

For input and output specifications, read the label on the R&S NRQ6 casing and

the data sheet.

Further information:

● For details on configuration, see the user manual.

5.7

Clock I/O (CLK)

See (7) in

Figure

The female SMA connector is used as an input or output for the sampling clock.

By default, the R&S NRQ6 generates its sampling clock internally. You can use

this signal for other devices (output).

If you supply the local oscillator signal externally, you can use an external signal

as sampling clock instead of the internal signal (input).

For input and output specifications, read the label on the R&S NRQ6 casing and

the data sheet.

Further information:

● For details on configuration, see the user manual.

5.8

See (8) in

Figure

The female SMA connector is used as an input or output for the local oscillator

(LO) signal.

For input and output specifications, read the label on the R&S NRQ6 casing and

the data sheet.

Further information:

● For details on usage and configuration, see the user manual.

Getting Started 1178.3705.02 ─ 07

5-1.

R&S NRQ6 Tour

Local Oscillator I/O (LO)

Table of Contents