Table of Contents
Advertisement
®
R&S
NRP Series
2. Remove the cable.
3.7
Connecting to a controlling host
As a controlling host, you can use:
●
Computer
●
Base unit
For operating the power sensor, you can choose from various possibilities. For
details, see
Chapter 5, "Operating
3.7.1
Computer
If the controlling host is a computer, you can operate the power sensor in several
ways. For details, see
► Establish the connection using:
● Host interface
See
Chapter 3.7.1.1, "Simple USB
See
Chapter 3.7.1.2, "R&S NRP‑Z5 sensor hub
● LAN interface, if the power sensor is a LAN power sensor
See
Chapter 3.7.3, "Using a LAN
3.7.1.1
Simple USB connection
All R&S NRP power sensors can be connected to the USB interface of a com-
puter.
Required equipment
● R&S NRP power sensor
● R&S NRP‑ZKU cable
Getting Started 1419.0170.02 ─ 16
concepts",
Chapter 5, "Operating
Connecting to a controlling host
on page 32.
concepts",
on page 32.
connection",
on page 16.
setup",
connection",
on page 20.
Preparing for use
on page 17.
16
Advertisement
Table of Contents
